Ada ZCТ 777 [11/46] Zct 777

ZCT 777

MEASUREMENT FOUNDATION

ZCT 777

11

Measure modes (menu item 2.1)

Single mode (menu item 2.1.1: In Single mode, readings are accompanied by a bleep. All readings taken in this mode will

be automatically entered into the statistics program.

Continuous measurement mode (menu item 2.1.2): It can sometimes be of advantage if the probe does not need be raised

between each measurement so that there is a running display of readings. All readings taken in this mode will be auto-

GROUP mode (menu item 2.2.2-2.2.5). If you work in this mode the word “GROx” must appear on the display. Measure-

ments are saved in the free programmable memory. Every group memory can store a maximum of 80 single readings, and

5 Statistic values. When the memory is full, measuring will make sequentially, but not be stored and statistic values won’t

be changed. You will see indication of full memory “FULL” on the display.

If you want you can delete the group with data and values (menu item 4) and also zero the values of calibration (menu item 5).

Probe (menu item 2.3)

The probe can work in three modes.

AUTO (menu item (2.3.1): The probe can automatically select the working mode. When Placed on steel (magnetic sub-

strates), it will work in magnetic induction principle. When placed on no-ferrous metals, it will work in eddy current principle.

Fe (menu item 2.3.2): The probe works in magnetic induction principle.

4.1 Current data

4.2 All data

4.3 Group data

5 Measurement view

6.1 Enable

6.2 Disable

6.3 Delete Zero N

6.4 Delete Zero F