Bosch AXT Rapid 2200 (0600853600) Инструкция по эксплуатации онлайн [14/237] 501865

Bosch AXT Rapid 2200 (0600853600) Инструкция по эксплуатации онлайн [14/237] 501865
14 | English
F 016 L81 412 | (5.3.18) Bosch Power Tools
get it replaced by a Bosch Service Cen-
tre; it cannot be safely replaced by any-
one else.
If the plug is not suitable for your socket
outlet, get a Bosch service agent to re-
place the plug. Dispose of the severed
plug immediately; never insert any plug
with severed flex into a mains socket,
even if the socket is switched off, as it
poses a risk of electric shock from the
exposed flex, which could be made live.
Extension leads. If your appliance is
intended for use outside the UK, it will
be fitted with a special “Schuko” plug
built into the appliance; this called an
appliance inlet. You will need an exten-
sion lead, or reel, fitted with a mating
‘Schuko’ socket at one end and a plug
suitable for your local supply system at
the other. This is not supplied with the
product.
If you have a UK appliance with a fitted
plug, you can use an extension lead, or
reel, with it.
Warning! Inadequate exten-
sion cables can be dangerous.
The following advice applies to
ALL extension leads for all products.
Extension leads used should comply
with EN 60884-2-7, and be intended
for outdoor use.
Extension reels should comply with
EN 61242/IEC 61242.
Follow the instructions supplied with
any lead or reel, and any local wiring
regulations.
There should be an earth core within
the cable.
Always ensure that leads are not
damaged, for instance by dragging
across rough ground, or being caught
on obstructions. Do not let the cable
or any connections stand in water.
Inspect the lead regularly for damage,
and repair or replace if damaged.
Any couplings between extension
leads should be of rubber, and be
protected against splashed water,
preferably by an IP55 approval.
Maximum length: for use with this
product, the maximum total length of
cable should be 30 m for extension
leads, or up to 60 m for a cable reel, if
an RCD (with rated residual current of
30 mA) is incorporated into the reel.
Minimum size: for use with this prod-
uct, the minimum nominal conductor
cross-sectional area of the cable
must be 1.25 mm
2
(UK) or 1.5 mm
2
(outside UK).
non-UK product: with appliance inlet
can still be used in the UK, with the ap-
propriate extension lead, which must,
of course, be fitted with a 13A UK plug.
Symbols
The following symbols are important for reading and under-
standing the operating instructions especally the diagrams.
Please take note of the symbols and their meaning. The cor-
rect interpretation of the symbols will help you to use the gar-
den product in a better and safer manner.
Symbol Meaning
Wear protective gloves
Movement direction
Reaction direction
Weight
Switching On
OBJ_BUCH-2230-003.book Page 14 Monday, March 5, 2018 8:40 AM

Содержание

Похожие устройства

Скачать