Fubag PG 950T [12/25] And preparation for storage cleaning

- 11 -

Check the condition of the washer.

Fit the spark plug in position and tighten it by hand to avoid damaging the threads.

Use a spark plug spanner to tighten it by 1/8-1/4 turn after it is seated to compress the washer.

Remove all dust and particles around the exhaust silencer.

Clean the motor pump, especially the air inlets & outlets of the engine, with a cloth and a brush.

Check the general condition of the motor pump and if change any defective parts.

If the pump is not used for a long period of time, it must be stored in accordance with the following

guidelines.

Unscrew the pump drain plug and empty the pump housing.

Clean the inside of the pump housing cover with a water jet.

Screw the pump drain plug back on.

Drain the fuel through the filler neck of the fuel tank.

Withdraw the spark plug, pour a maximum of 15ml of oil into the cylinder then refit the spark plug.

Slowly pull the recoil starter handle several times until encountering resistance, allow it to return

back gently, so that the oil is distributed throughout inside the cylinder.

Clean the outside of the motor pump, apply an anti-rust product over the damaged areas.

Cover the motor pump with a drop cloth to protect it from dust and store it in a clean and dry

location.

7. and Preparation for storageCleaning

www.fubag.ru

Omperator's anual