Makita PC5001C по бетону [2/12] Specifications

ENGLISH (Original instructions)

SPECIFICATIONS

Model PC5000C PC5001C

Wheel diameter 125 mm

Hole diameter 22.23 mm

Spindle thread M14

Rated speed (n)/No load speed (n

) 10000 min

-1

Overall length 437 mm 479 mm

Net weight 4.0 kg 5.1 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE002-1

Intended use

The tool is intended for planing concrete surfaces.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model PC5000C

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 91 dB(A)

Sound power level (L

) : 102 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG230-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : planing concrete

Vibration emission (a

) : 12.0 m/s

Uncertainty (K) : 1.5 m/s

For Model PC5001C