Makita PC5001C по бетону [6/12] Functional description

which the power tool was not designed cannot be

adequately guarded and are unsafe.

b) Always use undamaged wheel flanges that

are of correct size and shape for your selected

wheel. Proper wheel flanges support the wheel

thus reducing the possibility of wheel breakage.

Additional safety warnings:

17. Always install the dust cover before operation.

18. Be careful not to damage the spindle, the

flange (especially the installing surface) or the

lock nut. Damage to these parts could result in

wheel breakage.

19. Make sure the wheel is not contacting the

workpiece before the switch is turned on.

20. Before using the tool on an actual workpiece,

let it run for a while. Watch for vibration or

wobbling that could indicate poor installation

or a poorly balanced wheel.

21. Watch out for flying sparks. Hold the tool so

that sparks fly away from you and other

persons or flammable materials.

22. Do not leave the tool running. Operate the tool

only when hand-held.

23. Do not touch the offset diamond wheel

immediately after operation; it may be

extremely hot and could burn your skin.

24. Always be sure that the tool is switched off

and unplugged or that the battery cartridge is

removed before carrying out any work on the

tool.

25. Observe the instructions of the manufacturer

for correct mounting and use of wheels.

Handle and store wheels with care.

26. Do not use separate reducing bushings or

adaptors to adapt large hole wheels.

27. Use only flanges specified for this tool.

28. Pay attention that the wheel continues to

rotate after the tool is switched off.

29. If working place is extremely hot and humid, or

badly polluted by conductive dust, use a

short-circuit breaker (30 mA) to assure

operator safety.

30. Do not use the tool on any materials

containing asbestos.

31. Do not use water or grinding lubricant.

32. Ensure that ventilation openings are kept clear

when working in dusty conditions. If it should

become necessary to clear dust, first

disconnect the tool from the mains supply

( use non metallic objects ) and avoid

damaging internal parts.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Switch action

008415

CAUTION:

• Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

For tool with the lock-on switch

To start the tool, simply pull the switch trigger (A).

Release the switch trigger to stop. For continuous

operation, pull the switch trigger (A) and then push in the

lock lever (B). To stop the tool from the locked position,

pull the switch trigger (A) fully, then release it.

For tool with the lock-off switch

To prevent the switch trigger from accidentally pulled, a

lock lever is provided. To start the tool, push in the lock

lever (B) and then pull the switch trigger (A). Release the

switch trigger to stop.

For tool with the lock on and lock-off switch

To prevent the switch trigger from accidentally pulled, a

lock lever is provided. To start the tool, push in the lock

lever (B) and then pull the switch trigger (A). Release the

switch trigger to stop. For continuous operation, push in

the lock lever (B), pull the switch trigger (A) and then

push in the lock lever (B) further. To stop the tool from

the locked position, pull the switch trigger (A) fully, then

release it.

1. Lock lever

2. Switch trigger

Makita PC5001C по бетону [6/12] Functional description

Содержание

Похожие устройства