Bosch GDS 18 V-LI HT БЕЗ АККи ЗУ (06019B1300) [13/191] Technical data

Bosch GDS 18 V-LI HT без акк. и з.у (06019B1300) [13/191] Technical data
Technical data
Cordless impact screw-
driver
GDS 18 V-LI HT
Article number
3 601 JB1 3..
Rated voltage V = 18
No-load speed rpm 0–1.900
Impact rate rpm 0–2.100
Maximum torque, hard
screwdriving application ac-
cording to ISO 5393
Nm 650
Machine screw diameter mm M 12–M 20
Tool holder ½"
Weight according to
EPTA-Procedure 01:2014
kg 2.7-3.2
A)
Permitted ambient temperature
during charging °C 0 to +45
during operation
B)
and
during storage
°C –20 to +50
Recommended batteries GBA 18V..
GBA 18V... W
Recommended chargers GAL 18...W
C)
GAL 18V-..
GAX 18V-30
AL 1820 CV
AL 1860 CV
GAL 1880 CV
GAL 3680 CV
A) Depends on battery in use
B) Limited performance at temperatures <0°C
C) only for inductive batteries
Noise/Vibration Information
Noise emission values determined according to
EN62841-2-2.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 96dB(A); sound power level
107dB(A). Uncertainty K=3dB.
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to
EN62841-2-2:
Impact tightening of fasteners of the maximum capacity of
the tool:
a
h
=12.5 m/s
2
, K=3.4 m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Battery charging
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
u Do not continue to press the On/Off switch after the
power tool has automatically switched off. The battery
can be damaged.
Battery Charge Indicator
The three green LEDs of the battery charge indicator indic-
ate the state of charge of the battery (3). For safety reasons,
it is only possible to check the state of charge when the
power tool is not in operation.
Press the button for the battery charge indicator to show the
state of charge. This is also possible when the battery (3) is
removed.
LED Capacity
Continuous lighting 3 x green ≥ 2/3
Continuous lighting 2 x green ≥ 1/3
Continuous lighting 1 x green < 1/3
Flashing light 3 x green Reserve
If no LED lights up after pressing the button for the battery
charge indicator, then the battery is defective and must be
replaced.
Removing the battery
The battery (3) is equipped with two locking levels to pre-
vent the battery from falling out when pushing the battery re-
lease button (4)unintentionally. As long as the battery is in-
English | 13
Bosch Power Tools 1 609 92A 4PS | (24.10.2018)

Содержание

Похожие устройства

Скачать