Home
Главная
Makita
Винтоверт
DTD155RFE
Инструкция по эксплуатации Страница: 9

Makita DTD155RFE [9/52] Maintenance

9 ENGLISH

Holdthetoolrmlyandplacethepointofthedriverbit

inthescrewhead.Applyforwardpressuretothetoolto

theextentthatthebitwillnotslipoffthescrewandturn

the tool on to start operation.

NOTICE: If you use a spare battery to continue

the operation, rest the tool at least 15 min.

NOTE:Usetheproperbitfortheheadofthescrew/

bolt that you wish to use.

NOTE: When fastening M8 or smaller screw, choose

aproperimpactforceandcarefullyadjustpressureon

the switch trigger so that the screw is not damaged.

NOTE: Hold the tool pointed straight at the screw.

NOTE: If the impact force is too strong or you tighten

thescrewforatimelongerthanshowninthegures,

the screw or the point of the driver bit may be over-

stressed, stripped, damaged, etc. Before starting your

job,alwaysperformatestoperationtodeterminethe

proper fastening time for your screw.

Thefasteningtorqueisaffectedbyawidevarietyof

factorsincludingthefollowing.Afterfastening,always

check the torque with a torque wrench.

1. When the battery cartridge is discharged almost

completely, voltage will drop and the fastening

torque will be reduced.

2. Driver bit or socket bit

Failuretousethecorrectsizedriverbitorsocket

bit will cause a reduction in the fastening torque.

3. Bolt

• Eventhoughthetorquecoefcientandthe

class of bolt are the same, the proper fasten-

ing torque will differ according to the diame-

ter of bolt.

• Eventhoughthediametersofboltsarethe

same, the proper fastening torque will differ

accordingtothetorquecoefcient,theclass

of bolt and the bolt length.

4. Themannerofholdingthetoolorthematerial

of driving position to be fastened will affect the

torque.

5. Operating the tool at low speed will cause a reduc-

tion in the fastening torque.

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

TomaintainproductSAFETYandRELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers, always using Makita replacement parts.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

• Driverbits

• Socketbits

• Bitpiece

• Hook

• Toolhanger

• Plasticcarryingcase

• Makitagenuinebatteryandcharger

• Batteryprotector

NOTE: Some items in the list may be included in the

toolpackageasstandardaccessories.Theymay

differ from country to country.

Makita DTD155RFE [9/52] Maintenance

Содержание

Похожие устройства