Home
Главная
Световые технологии
Светильник
236 ARS/S (СТ 1041000180)
Инструкция по эксплуатации Страница: 2

Световые технологии 236 ARS/S (СТ 1041000180) Инструкция по эксплуатации онлайн [2/12] 514150

RUS Данный паспорт доступен для скачивания на сайте www.ltcompany.com в разделе «ПРОДУКЦИЯ»

ENG You are welcome to download the passport in the PRODUCT section on our web-site www.ltcompany.com

KAZ Бұл төлқұжаты сiз www.ltcompany.com сайтынан, «ӨНІМДЕР» бөлімінен жүктеп аласыз

BLR Дадзены пашпарт даступны для запампоўкі на сайце www.ltcompany.com ў раздзеле «ПРАДУКЦЫЯ»

UKR Электронна версія паспорту доступна на сайті www.ltcompany.com в розділі «ПРОДУКЦІЯ»

Lighting Technologies Factory LLC

Fixed light with diffusing louver

CERTIFICATE

1. Application

1.1. The fixed light is designed for general illumination of office, public and industrial rooms. It is powered from AC mains (220 V (±10%), 50 Hz (±0,4 Hz). Power quality shall comply with GOST

13109-97.

1.2. The light complies with safety requirements of GOST R IEC 60598-2-1, GOST R IEC 60598-1 and EMC requirements of GOST R 51318.

1.3. The light may be mounted at surface of normal flammability

1.4. Class of protection against electric shock: I (II for HBL light)

1.5. Climatic configuration and location category: UKhL4.

1.6. Degree of protection: IP20 (IP 23 for HBL light).

2. Delivery set

Light without lamps (pcs) 1

Starters (pcs)(the same as the number of lamps)

Package (pcs) 1

Certificate (pcs) 1

3. Safety

Never install, clean and replace light components (lamps), if power is ON.

4. Operation and installation

4.1. Operate the light under Electric Device Operation and Maintenance Guidelines.

4.2. Remove the louver from the unpacked light, pass power wires through the hole in the housing and install the housing on the mounting surface.

4.3. Connect wires to the terminal block according to specified polarity.

4.4. If adjustable ECG is used, connect control wires according to polarity specified by code only (refer to fig. 6).

4.5. Install the lamp(s).

4.6. Fix the louver in the housing by spring clips.

4.7. Clean the louver with soft cloth wetted with mild soap solution.

4.8. Caution! Rainbow effect on louver surface at PRBLUX lights using fluorescent lamps with 3-band luminophor for better color reproduction is not a production defect.

5. Acceptance

The light complies with the Specification and is admitted serviceable.

Manufacturing date:

QA inspector: _____________________________________________________________________________________________________________________________________________

Packed by: _______________________________________________________________________________________________________________________________________________

The light is certified.

6. Warranty

6.1. The Manufacturer undertakes to repair or replace the faulty light within the warranty period free of charge, if such fault is not caused by the Customer, and the light operated in normal

conditions.

6.2. Warranty period: 36 months as of the manufacturing date.

6.3. Service life of lights in normal climate subject to compliance with installation and operation requirements:

 8 years for lights with housing and/or lens made of polymeric materials

 10 years for other lights.

6.4. Failure of the fluorescent lamps and the starters shall not be considered as a defect.

Manufacturer address: Maguistralnaya Street 11-a, Ryasan, 390010, Russia

Date of sale: ______________________________________________________________________________________________________________________________________________

Shop stamp

Световые технологии 236 ARS/S (СТ 1041000180) Инструкция по эксплуатации онлайн [2/12] 514150

Похожие устройства