Makita RBL250 [7/15] Assembly instructions

ASSEMBLY INSTRUCTIONS ASSEMBLY OF BLOWER PIPES Caution Before performing any work on the blower always switch off the motor and pull the spark plug connectors off the spark plug Always wear protective gloves Caution Start the blower only after having assembled it completely 1 Align grooves in the blower pipe with pegs on the blower housing and slide the pipe onto housing 2 Turn the blower pipe clockwise to lock it into place FUELS REFUELLING FUEL AND OIL MIXTURE Inspect the fuel tank and fill with clean fresh fuel of the proper mixture to assure the longer life of the tool Use the following mixed gas Gasoline Makita genuine two stroke engine oil 50 1 or Gasoline Other manufacturer s two stroke engine oil 25 1 recommended FOR CALIFORNIA REGULATION THIS EQUIPMENT IS CERTIFIED TO OPERATE ON GASOLINE TWO STROKE ENGINE OIL WHEN MIXING GASOLINE WITH TWO STROKE ENGINE OIL USE ONLY GASOLINE WHICH CONTAINS NO ETHANOL OR METHANOL TYPES OF ALCOHOL THIS WILL HELP TO AVOID POSSIBLE DAMAGE TO ENGINE FUEL LINES AND OTHER ENGINE PARTS DO NOT MIX GASOLINE AND OIL DIRECTLY IN THE FUEL TANK IMPORTANT Failure to follow proper fuel mix instructions may cause damage to the engine CAUTION When preparing fuel mixture mix only the amount needed for the job you are to do Do not use fuel mixture that has been stored longer than two months Fuel mixture stored longer than this will cause hard starting and poor performance If fuel mix has been stored longer than this time it should be removed and filled with a fresh mixture Never fill the fuel tank to the very top Never add fuel to the tank in a closed unventilated area Do not add fuel to this unit close to an open fire or sparks Be sure to wipe off spilled fuel before attempting to start the engine Do no attempt to refuel a hot engine Refuelling The engine must be switched off Thoroughly clean the area around the plugs 1 to prevent dirt from getting into the fuel tank Unscrew the plug 2 and fill the tank with fuel as the case may be Tightly screw on the plug 2 Clean screw plug and tank after refuelling 7

Скачать