Grillo Climber 8.22 Инструкция по эксплуатации онлайн [12/67] 520662

Climber 8.22/ Translation of the original instructions

FRONT BRAKE

The front brake (4, fig. 1) must be used only as emergency brake when driving downhill in order to

avoid the machine sliding. If you use it together with the differential lock, the machine is steadier,

above all in slope conditions. In normal conditions, to slow down and brake you only need to use the

feed lever. To adjust the cables use the adjusters (fig. 24).

PARKING BRAKE

To engage the parking brake lift the loop up (fig. 3, no. 10) and hook the lever. To adjust the parking

The machine is equipped with the an hourmeter with three different functions:

1) It always shows the no. of hours worked, even when the key is not inserted.

2) It displays the no. of hours to the next engine oil change (OIL CHANGE IN...HS). The first oil

change must be carried out after the first 20 working hours than every 100 working hours. The

indicator “OIL CHANGE” flashes automatically when it is necessary to change the oil.

3) It displays the no. of hours to the next lubrication (LUBE IN...HS). Lubrication must be carried out

every 40 working hours. The indicator “LUBE” flashes automatically when lubrication must be carried

out.

By pushing the white button you can choose the function to be displayed on the hour meter.

USEFUL RULES FOR EFFICIENT USE

5) Keep the engine at peak rpm during mowing, adjust the speed according to the height of the grass.

6) Keep the grids above the engine and the cooling fins of the hydraulic motor (fig. 4 – 5)

clean.

CUTTING POSITIONS

The cutting position is adjusted using the lever (fig. 2, no. 8). The deck can be set in 4 different cutting

positions from 35 to 110 mm and one travel position in which the blade disengages automatically. In

case of uneven ground, humps or dips, the deck should be kept in the highest cutting position to

prevent knocks by the blade. On the cutter deck (fig. 27) a baffle is fixed under right hand side of the

deck (fig. 25). You can insert it on the seat (fig. 26) and fix it with the relative lever. This baffle helps to

obtain a homogeneous distribution of the cut grass. It has to be used only at 12/15 mm grass height.

possibly the front emergency brake (4, fig. 1) the machine is steadier.

9