Uni-T UT55 [3/20] The meter is suitable for indoor use only
![Uni-T UT55 [3/20] The meter is suitable for indoor use only](/views2/1665310/page3/bg3.png)
l Replace the battery as soon as the battery
indicator " " appears. With a low battery,
the Meter might produce false readings
that can lead to electric shock and personal
injury.
l Turn off the Meter once finished measuring,
fetch out the battery, when the meter will
not be used for long period.
l Do not operate the Meter under adverse
environmental condition especially humid
area.
l To avoid damages and dangerous, do not
change the circuit.
l Periodically wipe the case with a damp
cloth and mild detergent. Do not use
abrasives or solvents.
l International Electrical Symbols:
Low Battery Earth Ground
Safety Rules
Double Insulated
AC
Diode
Dangerous Voltages
DC
Buzzer
Fuse
l Make sure to use new fuses with proper
rating in stead of bad fuses .
l To avoid electric shock or damages, do
not apply more than 1000V between the
"COM" terminals and" "earth ground.
l Use caution when working with Voltages
above 60V (DC) or 30Vrms (AC). These
Voltages pose shock hazard.
l The Meter is suitable for indoor use only.
Model UT51-55: OPERATING MANUAL
3
Содержание
- The meter is suitable for indoor use only 3
- Accuracy is specified for one year after calibration 5
- At operating temperatures 23 5
- B 1direct current voltage dc voltage 5
- B 2 alternating current voltage ac voltage 5
- B specifications 5
- Frequency 40hz 400hz overload protection 200mv is 250vdc or ac rms all other ranges is 750vrms or 1000vp p display average value rms of sine wave 5
- Input impedance all ranges are 10 5
- Overload protection 200mv is 250vdc or ac rms all other ranges is 750vrms or 1000vp p 5
- With relative humidity at 75 accuracy specifications take the form of a readings digits 5
- B 5 resistance 8
- B 6 capacitance 8
- B 7 frequency 8
- Range as test lead is short circuit the lcd display 10 digits is normal deduct the 10 digits from the measured reading during measuring 8
- Range open circuit voltage around 3v overload protection all ranges 250vdc or ac rms caution at 200 8
- Testing signal around 400hz 40mvrms 8
- Voltage at open circuit 700mv 200 8
- B 10 transistor hfe test 9
- B 8 temperature 9
- B 9 diode test and continuity beeper 9
- Input sensitivity 100mvrms overload protection 250vrms 9
- Overload protection 250v dc or ac rms 9
- C making measurements 10
- Capacitance jack 10
- Input jack 10
- Liquid crystal display 10
- On off switch 10
- Rotary switch 10
- Temperature jack 10
- Transistor jack 10
- Please refer to dc current caution 1 2 3 12
- C 7 measuring frequency 14
- D maintenance i general service 15
Похожие устройства
- Uni-T UT56 Инструкция по эксплуатации
- Uni-T UT56 Расширенная инструкция
- Uni-T UT56 Инструкция язык en
- Uni-T UT58A Инструкция по эксплуатации
- Uni-T UT58A Расширенная инструкция
- Uni-T UT58A Инструкция язык en
- Uni-T UT58B Инструкция по эксплуатации
- Uni-T UT58B Расширенная инструкция
- Uni-T UT58B Инструкция язык en
- Uni-T UT58C Инструкция по эксплуатации
- Uni-T UT58C Расширенная инструкция
- Uni-T UT58C Инструкция язык en
- Uni-T UT58D Инструкция по эксплуатации
- Uni-T UT58D Расширенная инструкция
- Uni-T UT58D Инструкция язык en
- Uni-T UT58E Инструкция по эксплуатации
- Uni-T UT58E Расширенная инструкция
- Uni-T UT58E Инструкция язык en
- Uni-T UT60A Расширенная инструкция
- Uni-T UT60A Инструкция по эксплуатации