AXIOMET AX-3550 [2/12] Safety information

1. Safety Information

To avoid possible electric shock or personal injury, and to avoid possible damage to the Meter or to

the equipment under test, adhere to the following rules:

1. Before using the Meter inspect the case. Do not use the Meter if it is damaged or the case

(or part of the case) is removed. Look for cracks or missing plastic. Pay attention to the

insulation around the connectors.

2. Inspect the test leads for damaged insulation or exposed metal. Replace damaged test

leads with identical model number or electrical specifications before using the Meter.

3. Do not apply more that the rated voltage, as marked on the Meter.

4. When measurement has been completed, disconnect the connection between the test

leads and the circuit under test, remove the esting leads away from the input terminals of

the Meter and turn the Meter power off.

5. Do not carry out the measurement when the Meter’s back case and / or battery door is

opened to avoid electric shock.

6. When the Meter working at an effective voltage over 30V in AC, special care should be

taken.

7. Use the proper terminals and functionyou're your measurements.

8. Do not use or store the Meter in an environment of high temperature, humidity, explosive,

inflammable and strong magnetic field. The performance of the Meter may deteriorate

after dampened.

9. Do not use the Meter if the surface of it is wet or the user’s hands are wet.

10. When using the test leads, keep your fingers behind the finger guards