Home
Главная
Gigabyte
Материнская Плата
Z390 GAMING SLI
Инструкция Страница: 43

Gigabyte Z390 GAMING SLI [43/48] Memory

InstallingtheSATARAID/AHCIDriverandOperatingSystem

With the correct BIOS settings, you are ready to install the operating system.

InstallingtheOperatingSystem

AssomeoperatingsystemsalreadyincludeSATARAID/AHCIdriver,youdonotneedtoinstallseparateRAID/

AHCI driver during the Windows installation process. After the operating system is installed, we recommend

thatyouinstallallrequireddriversfromthemotherboarddriverdiskusing"XpressInstall"toensuresystem

performance and compatibility. If the operating system to be installed requires that you provide additional SATA

RAID/AHCIdriverduringtheOSinstallationprocess,pleaserefertothestepsbelow:

1. Copy the IRST folder under \Boot in the driver disk to your USB thumb drive.

2. Boot from the Windows setup disk and perform standard OS installation steps. When the screen requesting

you to load the driver appears, select Browse.

3. ThenbrowsetotheUSBashdriveandselectthelocationofthedriver.Thelocationofthedriverisas

follows:\IRST\f6py-x64

4. When a screen as shown, select IntelChipsetSATARAIDController and click Next to load the driver and

continue the OS installation.

3-2 InstallinganIntel

Optane

™

Memory

SystemRequirements

1. Intel

Optane

™

memory

2. The Optane

™

memory must have at least 16 GB capacity, and it must have equal or smaller capacity than

the hard drive/SSD to be accelerated.

3. The Optane

™

memorycannotbeusedtoaccelerateanexistingRAIDarray;theacceleratedharddrive/SSD

cannotbeincludedinaRAIDarray.

4. The hard drive/SSD to be accelerated must be a SATA hard drive or M.2 SATA SSD.

5. The hard drive/SSD to be accelerated can be a system drive or data drive. The system drive must be GPT

formatted and have Windows 10 64-bit (or later version) installed on it. The data drive must also be GPT

formatted.

6. The motherboard driver disk

Installation Guidelines

A-1:InstallationinAHCImode

IftheSATAcontrollerhasbeenconguredinAHCImode,pleasefollowthestepsbelow:

1. After entering the operating system, insert the motherboard driver disk into your optical drive. On the Xpress

Install screen, select Intel(R)Optane(TM)MemorySystemAcceleration

(Note)

to install. Follow the on-screen

instructions to continue. When completed, restart the system.

2. After re-entering the operating system, follow the on-screen instructions to complete the settings, and then the

Intel

Optane

™

Memory application will appear automatically. If you install more than one Optane

™

memory,

please select which one you are going to use. Then select which drive to be accelerated. Click Enable. All

data on the Optane

™

memory will be erased. Make sure you back up the data before continuing. Follow the

on-screen instructions to proceed. When completed, restart the system.

3. Launch the Intel

Optane

™

Memory application from the Start menu and make sure the Intel

Optane

™

Memoryhasbeenenabled.(TheSATAcontrollermodeischangedto"IntelRSTPremiumWithIntelOptane

SystemAcceleration"fromAHCImode.DONOTchangeyourSATAcontrollermodebacktoAHCI.Doing

so will cause the Optane

™

memory unable to function properly.)

4. Ifyouwanttoacceleratethesystemdrive,youcanselectspecicfolders,les,orapplicationstoaccelerate

using the Intel

Optane

™

MemoryPinning function. (The Intel

Optane

™

memory used must have at least

32 GB capacity.)

(Note) If the system already has Intel

RapidStorageTechnologyutilityinstalled,youhavetoremoveitrst

beforeinstallingtheIntel(R)Optane(TM)MemorySystemAccelerationapplication.

- 43 -

Gigabyte Z390 GAMING SLI [43/48] Memory

Содержание

Похожие устройства