![Gigabyte B460M GAMING HD [25/43] Channel interleaving](/img/pdf.png)
Gigabyte B460M GAMING HD [25/43] Channel interleaving
![Gigabyte B460M GAMING HD [25/43] Channel interleaving](/views2/1666513/page25/bg19.png)
& ExtremeMemoryProle(X.M.P.)
(Note)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Prole1 Uses Prole 1 settings.
Prole2
(Note)
Uses Prole 2 settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Ref Clock
Allows you to manually adjust the memory reference clock. (Default: Auto)
& Memory Odd Ratio (100/133 or 200/266)
Enabled allows Qclk to run in odd frequency. (Default: Auto)
Advanced Memory Settings
& Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically congure this setting. (Default: Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
congure this setting. (Default: Auto)
& Memory Boot Mode
Provides memory detection and training methods.
Auto Lets the BIOS automatically congure this setting. (Default)
Normal The BIOS automatically performs memory training. Please note that if the system
becomes unstable or unbootable, try to clear the CMOS values and reset the board
to default values. (Refer to the introductions of the battery/clear CMOS jumper in
Chapter 1 for how to clear the CMOS values.)
Enable Fast Boot Skip memory detection and training in some specic criteria for faster memory
boot.
Disable Fast Boot Detect and train memory at every single boot.
& Realtime Memory Timing
Allows you to ne-tune memory timings after the BIOS stage. (Default: Auto)
& Memory Enhancement Settings
Provides several memory performance enhancement settings: Relax OC, Enhanced Stability, Normal,
Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default: Auto)
& Memory Channel Detection Message
Allows you to determine whether to show an alert message when the memory is not installed in the optimal
memory channel. (Default: Enabled)
SPD Info
Displays information on the installed memory.
(Note) This item is present only when you install a CPU and a memory module that support this feature.
- 25 -
Содержание
- B460m gaming hd 1
- Rev 1001 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- B460m gaming hd motherboard layout 3
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 9 3
- Chapter 3 appendix 7 3
- Table of contents 3
- B460m gaming hd 4
- B460m gaming hd motherboard 4
- B460m gaming hd motherboard layout 4
- Box contents 4
- Motherboard driver disc 5 two sata cables 4
- User s manual 5 i o shield 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the cpu 9
- 4 installing the memory 9
- Dualchannelmemoryconfiguration 9
- Installing the cpu 9
- 5 installing an expansion card 10
- 6 back panel connectors 10
- D sub port 10
- Hdmi port 10
- Ps 2 keyboard and ps 2 mouse port 10
- Usb 3 gen 1 port 10
- Audio jack configurations 11
- Line in rear speaker out blue 11
- Line out front speaker out green 11
- Mic in center subwoofer speaker out pink 11
- Playback device to change the default setting first 11
- Please visit gigabyte s website for details on configuring the audio software 11
- Rj 45 lan port 11
- The gigabit ethernet lan port provides internet connection at up to 1 gbps data rate the following describes the states of the lan port leds 11
- The integrated hd high definition audio provides jack retasking capability that allows the 11
- The line in jack use this audio jack for line in devices such as an optical drive walkman etc 11
- The line out jack use this audio jack for a headphone or 2 channel speaker 11
- The mic in jack 11
- The usb port supports the usb 2 1 specification use this port for usb devices 11
- To configure 7 channel audio you need to open the audio software and select device 11
- Usb 2 1 port 11
- User to change the function for each jack through the audio driver 11
- 7 internal connectors 12
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 13
- 4 cpu_fan sys_fan fan headers 13
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 13
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 13
- Overheating overheating may result in damage to the cpu or the system may hang 13
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 13
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 13
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 13
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 13
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 14
- Connect your rgb led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of this header incorrect connection may lead to the damage of the led strip 14
- Follow the steps below to correctly install an m ssd in the m connector step 1 locate the proper mounting hole for the m ssd to be installed and then install the mounting clip first step 2 slide the m ssd into the connector at an angle step 3 press the m ssd down and then secure it by pressing the clip pin into the mounting hole 14
- For how to turn on off the lights of the led strip please visit the unique features webpage of gigabyte s website 14
- Led_c rgb led strip header 14
- M2m_pch m socket 3 connector 14
- Pin no definition 14
- Select the proper hole for the mounting clip according to the length of the m ssd to be installed 14
- The header can be used to connect a standard 5050 rgb led strip 12v g r b with maximum power rating of 2a 12v and maximum length of 2m 14
- The m connector supports m sata ssds or m pcie ssds and supports sata raid configuration please note that an m pcie ssd cannot be used to create a raid set with a sata hard drive refer to chapter 3 configuring a raid set for instructions on configuring a raid array 14
- Chipset supports raid 0 raid 1 raid 5 and raid 10 refer to chapter 3 configuring a raid set for instructions on configuring a raid array 15
- Ci chassis intrusion header connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 15
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 15
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 15
- Connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 15
- F_panel front panel header 15
- Hd hard drive activity led connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 15
- Nc no connection 15
- Pled pwr_led power led 15
- Pw power switch connects to the power switch on the chassis front panel you may configure the way to turn off your system using the power switch refer to chapter 2 bios setup settings platform power for more information 15
- Res reset switch connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 15
- Sata3 0 1 2 3 sata 6gb s connectors 15
- Speak speaker 15
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 15
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 15
- To enable hot plugging for the sata ports refer to chapter 2 bios setup settings io ports sata and rst configuration for more information 15
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 16
- F_audio front panel audio header 16
- F_u32 usb 3 gen 1 header 16
- F_usb1 f_usb2 usb 2 1 headers 16
- From the power outlet to prevent damage to the usb bracket 16
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 16
- The front panel audio header supports high definition audio hd you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 16
- The header conforms to usb 3 gen 1 and usb 2 specification and can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 16
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 16
- After system restart go to bios setup to load factory defaults select load optimized defaults or 17
- Always turn off your computer and unplug the power cord from the power outlet before clearing 17
- Clk 12 rst 17
- Clr_cmos clear cmos jumper 17
- Com serial port header 17
- Data input 11 nc 17
- Data output 7 chip select 17
- Gnd 10 no pin 17
- Manually configure the bios settings refer to chapter 2 bios setup for bios configurations 17
- Nc 10 nc 17
- Ndcd 6 ndsr 17
- Ndtr 9 nri 17
- No pin 9 irq 17
- Nsin 7 nrts 17
- Nsout 8 ncts 17
- Open normal 17
- Pin no definition pin no definition 17
- Power 3 v 8 gnd 17
- Short clear cmos values 17
- Spi_tpm trusted platform module header 17
- The cmos values 17
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 17
- Use this jumper to clear the bios configuration and reset the cmos values to factory defaults to clear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 17
- You may connect an spi tpm trusted platform module to this header 17
- Bat battery 18
- 1 startup screen 19
- Chapter 2 bios setup 19
- 2 the main menu 20
- Advanced mode function keys 20
- 3 favorites f11 21
- 4 tweaker 22
- Advanced cpu settings 22
- Avx offse 22
- Cpu clock ratio 22
- Cpu over temperature protectio 22
- Fclk frequency for early power on 22
- Hyper threading technology 22
- Igp rati 22
- No of cpu cores enabled 22
- Ring ratio 22
- Cpu eist functio 23
- Cpu enhanced halt c1e 23
- Cpu flex ratio override 23
- Cpu flex ratio settings 23
- Cpu thermal monito 23
- D active turbo ratios 23
- D c states control 23
- Energyefficientturb 23
- Intel r speed shift technology inte 23
- Intel r turbo boost max technology 3 23
- Intel r turbo boost technology 23
- Race to halt rth 23
- Ring to core offset down bin 23
- Speed shift technology 23
- Turbo ratio 23
- Voltage optimization 23
- C10 state suppor 24
- C3 state suppor 24
- C6 c7 state support 24
- C8 state suppor 24
- Core current limit amps 24
- D turbo per core limit contro 24
- D turbo power limits 24
- Dram power limit dram power limit time 24
- Package c state limi 24
- Package power limit tdp watts package power limit time 24
- Advanced memory settings 25
- Channel interleaving 25
- Extremememoryprofile x m p 25
- Memory boot mode 25
- Memory channel detection message 25
- Memory enhancement settings 25
- Memory multiplier tweaker 25
- Memory odd ratio 100 133 or 200 266 25
- Memory ref clock 25
- Rank interleaving 25
- Realtime memory timing 25
- Spd info 25
- System memory multiplier 25
- 5 settings 27
- Dmi aspm 27
- Pch aspm 27
- Peg aspm 27
- Platform power 27
- Platform power management 27
- Power on by keyboard 27
- Power on by mouse 27
- Power on password 27
- Ac back 28
- Aperture size 28
- Dvmt pre allocated 28
- Dvmt total gfx mem 28
- Initial display output 28
- Internal graphics 28
- Io ports 28
- Onboard lan controller 28
- Power loading 28
- Rc6 render standby 28
- Resume by alarm 28
- Soft off by pwr bttn 28
- Above 4g decoding 29
- Audio controller 29
- Ioapic 24 119 entries 29
- Ipv4 http support 29
- Ipv4 pxe support 29
- Ipv6 http support 29
- Ipv6 pxe support 29
- Legacy usb support 29
- Mass storage devices 29
- Media detect count 29
- Network stack 29
- Networkstackconfiguration 29
- Pxe boot wait time 29
- Serial port 29
- Superioconfiguration 29
- Usb mass storage driver support 29
- Usbconfiguration 29
- Xhci hand off 29
- 3dmark01 enhancement 30
- Aggressive lpm support 30
- Configuredasesata 30
- Ez raid 30
- Hot plug 30
- Intel platform trust technology ptt 30
- Leds in system power on state 30
- Max link speed 30
- Miscellaneous 30
- Nvmeconfiguration 30
- Port 0 1 2 3 30
- Realtek pcie gbe family controller 30
- Sata controller s 30
- Sata mode selection 30
- Sataandrstconfiguration 30
- Software guard extensions sgx 30
- Case open 31
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 31
- Fan control mode 31
- Fan control use temperature input 31
- Fan fail warning 31
- Fan speed 31
- Fan speed control 31
- Fan stop 31
- Flow rate 31
- Monitor 31
- Pc health status 31
- Reset case open status 31
- Smart fan 5 31
- Temperature 31
- Temperature interval 31
- Temperature warning control 31
- Trusted computing 31
- 6 system info 32
- Access level 32
- Plug in devices info 32
- Q flash 32
- System date 32
- System language 32
- System time 32
- 7 boot 33
- Boot option priorities 33
- Bootup numlock state 33
- Fast boot 33
- Full screen logo show 33
- Sata support 33
- Security option 33
- Vga support 33
- Csm support 34
- Lan pxe boot option rom 34
- Mouse speed 34
- Network stack driver support 34
- Next boot after ac power loss 34
- Other pci devices 34
- Ps2 devices support 34
- Storage boot option control 34
- Usb support 34
- Windows 10 features 34
- Administrator password 35
- Preferred operating mode 35
- Secure boot 35
- User password 35
- 8 save exit 36
- Boot override 36
- Exit without saving 36
- Load optimized defaults 36
- Loadprofiles 36
- Save exit setup 36
- Saveprofiles 36
- 1 configuring a raid set 37
- 1 configuringaraidset 37
- A installing sata hard drive s in your computer 37
- B configuringsatacontrollermodeinbiossetup 37
- Before you begin please prepare the following items 37
- C 1 using ez raid 37
- Chapter 3 appendix 37
- Configuringtheonboardsatacontroller 37
- Raid levels 37
- C 2 uefiraidconfiguration 38
- C 3 configuringlegacyraidrom 38
- 2 installing an inte 39
- 2 installing an intel optane memory 39
- Install the raid driver and operating system 39
- Installation guidelines a 1 installation in ahci mode 39
- Installing the operating system 39
- Memory 39
- System requirements 39
- A 2 installation in intel rst premium with intel optane system acceleration mode 40
- 3 drivers installation 41
- Regulatory notices 42
- United states of america federal communications commission statement 42
- Contact us 43
- Gigabyte esupport 43
- To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 43
Похожие устройства
- Gigabyte Z490M GAMING X Инструкция
- Gigabyte Z490 GAMING X AX Инструкция
- Gigabyte Z490 GAMING X Инструкция
- Gigabyte GA-AB350-Gaming 3 (rev. 1.x) Инструкция
- Gigabyte GA-AB350-Gaming 3 (rev. 1.x) Инструкция по установке
- Gigabyte GA-AB350-Gaming (rev. 1.x) Инструкция
- Gigabyte GA-AB350-Gaming (rev. 1.x) Инструкция по установке
- Gigabyte GA-AX370M-Gaming 3 (rev. 1.x) Инструкция
- Gigabyte GA-AX370-Gaming K3 (rev. 1.0) Инструкция по установке
- Gigabyte GA-AX370-Gaming K3 (rev. 1.0) Инструкция
- Gigabyte GA-AX370-Gaming (rev. 1.x) Инструкция по установке
- Gigabyte GA-AX370-Gaming (rev. 1.x) Инструкция
- Gigabyte B450M GAMING Инструкция
- Gigabyte B450 Gaming X Инструкция по установке
- Gigabyte B450 Gaming X Инструкция
- Gigabyte X570 GAMING X (rev. 1.1) Инструкция
- Daikin EUWAB030BZY Инструкция по монтажу
- Daikin EUWAB030BZY Инструкция по эксплуатации
- Daikin EUWYB030BZY Инструкция по монтажу
- Daikin EUWYB030BZY Инструкция по эксплуатации
Скачать
Случайные обсуждения