![Gigabyte GA-H61M-S2PV (rev. 2.0) [33/40] Acpi suspend type](/img/pdf.png)
Gigabyte GA-H61M-S2PV (rev. 2.0) [33/40] Acpi suspend type
![Gigabyte GA-H61M-S2PV (rev. 2.0) [33/40] Acpi suspend type](/views2/1669001/page33/bg21.png)
- 33 -
(Note) Supported on Windows 7/Vista operating system only.
ACPI Suspend Type
Species the ACPI sleep state when the system enters suspend.
S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state.
In S1 sleep state, the system appears suspended and stays in a low power mode.
The system can be resumed at any time.
S3(STR) Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state (default).
In S3 sleep state, the system appears to be off and consumes less power than in the
S1 state. When signaled by a wake-up device or event, the system resumes to its
working state exactly where it was left off.
Soft-Off by PWR-BTTN
Congures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
PME Event Wake Up
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or PCIe de-
vice. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
(Default: Enabled)
Power On by Ring
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that
supports wake-up function. (Default: Enabled)
Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Date (of Month) Alarm: Turn on the system at a specic time on each day or on a specic day in a month.
Time (hh: mm: ss) Alarm: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
HPET Support
(Note)
Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system.
(Default: Enabled)
HPET Mode
(Note)
Allows you to select the HPET mode for your Windows 7/Vista operating system. Select 32-bit mode
when you install 32-bit Windows 7/Vista; select 64-bit mode when you install 64-bit Windows 7/Vista.
This item is congurable only when the HPET Support is set to Enabled. (Default: 32-bit mode)
Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled Disables this function. (Default)
Double Click Double click on left button on the PS/2 mouse to turn on the system.
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled Disables this function. (Default)
Password Set a password with 1~5 characters to turn on the system.
Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.
Содержание
- Ga h61m s2pv 1
- User s manual 1
- Copyright 3
- Disclaimer 3
- Identifying your motherboard revision 3
- Chapter 1 hardware installation 4
- Chapter 2 bios setup 0 4
- Chapter 3 drivers installation 8 4
- Ga h61m s2pv motherboard layout ga h61m s2pv motherboard block diagram 4
- Table of contents 4
- Box contents 5
- Ga h61m s2pv 5
- Ga h61m s2pv motherboard 5
- Ga h61m s2pv motherboard layout 5
- Motherboard driver disk motherboard driver disk two sata cables 5
- User s manual user s manual i o shield 5
- Ga h61m s2pv motherboard block diagram 6
- 1 installation precautions 7
- Chapter 1 hardware installation 7
- 2 product specifications 8
- 2 productspecifications 8
- 3 installing the cpu 10
- Installing the cpu 10
- 4 installing the memory 11
- 5 installing an expansion card 11
- Dualchannelmemoryconfiguration 11
- 6 back panel connectors 12
- D sub port 12
- Dvi d por 12
- Line in jack blue 12
- Line out jack green 12
- Mic in jack pink 12
- Parallel port 12
- Ps 2 keyboard and ps 2 mouse port 12
- Rj 45 lan port 12
- Usb 2 1 port 12
- 7 internal connectors 13
- 2 atx_12v atx 2x2 12v power connector and 2x12 main power connector 14
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 14
- With the use of the power connector the power supply can supply enough stable power to all the com ponents on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation the 12v power con nector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 14
- 4 cpu_fan sys_fan fan headers 15
- Sata2 0 1 2 3 sata 3gb s connectors 15
- The motherboard has a 4 pin cpu fan header cpu_fan a 4 pin system fan header sys_fan most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the motherboard supports cpu fan speed control which requires the use of a cpu fan with fan speed control design for optimum heat dis sipation it is recommended that a system fan be installed inside the chassis 15
- The sata connectors conform to sata 3gb s standard and are compatible with sata 1 gb s standard each sata connector supports a single sata device 15
- F_panel front panel header 16
- Audio signals will be present on both of the front and back panel audio connections simultane 17
- Cord from the power outlet to prevent damage to the usb bracket 17
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb header 17
- F_audio front panel audio header 17
- F_usb1 f_usb2 usb 2 1 headers 17
- Instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 17
- Ously some chassis provide a front panel audio module that has separated connectors on each wire 17
- Prior to installing the usb bracket be sure to turn off your computer and unplug the power 17
- The front panel audio header supports hd audio by default 17
- The front panel audio header supports intel high definition audio hd and ac 97 audio you may connect your chassis front panel audio module to this header make sure the wire assignments of the module con nector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 17
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 17
- Always turn off your computer and unplug the power cord from the power outlet before clear 18
- Clr_cmos clear cmos jumper 18
- Com serial port header 18
- Faults or manually configure the bios settings refer to chapter 2 bios setup for bios configurations 18
- Ing the cmos values after system restart go to bios setup to load factory defaults select load optimized de 18
- The com header can provide one serial port via an optional com port cable for purchasing the op tional com port cable please contact the local dealer 18
- Use this jumper to clear the cmos values e g date information and bios configurations and reset the cmos values to factory defaults to clear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 18
- Bat battery 19
- 1 startup screen 20
- A the logo screen default 20
- B the post screen 20
- Chapter 2 bios setup 20
- 2 the main menu 21
- Access more advanced options when the system is not stable as usual select the load optimized defaults item to set your 21
- F11 save cmos to bios 21
- Keys for the main menu only 21
- Sample bios version fa 21
- System to its defaults the bios setup menus described in this chapter are for reference only and may differ by bios 21
- To accept or enter a sub menu 21
- To complete 21
- Version 21
- 3 mb intelligent tweaker m i t 22
- This section provides information on the bios version cpu base clock cpu frequency memory frequency total memory size cpu temperature vcore and memory voltage 22
- Whether the system will work stably with the overclock overvoltage settings you made is dependent on your overall system configurations incorrectly doing overclock overvoltage may result in dam age to cpu chipset or memory and reduce the useful life of these components this page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results inadequately altering the settings may result in system s failure to boot if this occurs clear the cmos values and reset the board to default values 22
- Advanced cpu core features 23
- Advanced frequency settings 23
- Allows you to alter the clock ratio for the installed cpu the adjustable range is dependent on the cpu being installed 23
- Cpu clock ratio 23
- Cpu frequency 23
- Displays the current operating cpu frequency 23
- M i t current status 23
- Note this item is present only when you install a cpu that supports this feature for more information about intel cpus unique features please visit intel s website 23
- This screen provides information on cpu memory frequencies parameters 23
- C3 c6 state suppor 24
- Core current limit amps 24
- Cpu cores enable 24
- Cpu eist functio 24
- Cpu enhanced halt c1e 24
- Cpu multi threadin 24
- Cpu thermal monito 24
- Intel r turbo boost tech 24
- Turbo power limit watts 24
- Turbo ratio 1 core 2 core 3 core 4 core 24
- Advanced memory settings 25
- Allows the system to operate at three different performance levels 25
- Allows you to set the onboard graphics clock the adjustable range is from 400 mhz to 3000 mhz default auto 25
- Allows you to set the system memory multiplier auto sets memory multiplier according to memory spd data default auto 25
- Auto lets the bios automatically configure this setting default 25
- Bi directional procho 25
- Disabled only allows the cpu to detect whether an overheating is occurring to emit pro chot signals 25
- Enabled when the cpu or chipset detects that an overheating is occurring prochot sig nals will be emitted to lower cpu performance to decrease heat production 25
- Extreme lets the system operate at its best performance level 25
- Internal graphics clock 25
- Memory frequency mhz 25
- Note this item is present only when you install a cpu that supports this feature for more information about intel cpus unique features please visit intel s website 25
- Performance enhance 25
- Standard clock control 25
- Standard lets the system operate at its basic performance level 25
- System memory multiplier spd 25
- System memory multiplier spd memory frequency mhz 25
- The first memory frequency value is the normal operating frequency of the memory being used the sec ond is the memory frequency that is automatically adjusted according to the system memory multiplier settings 25
- The settings under the two items above are synchronous to those under the same items on the ad vanced frequency settings menu 25
- Turbo lets the system operate at its good performance level default 25
- Cas latency time 26
- Channel a b advanced timing control 26
- Channel a b standard timing control 26
- Channel a b timing settings 26
- Channel interleaving 26
- Displays the memory voltage as 1 v 26
- Dram timing selectable spd 26
- Enables or disables memory channel interleaving enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability auto lets the bios au tomatically configure this setting default auto 26
- Enables or disables memory rank interleaving enabled allows the system to simultaneously access dif ferent ranks of the memory to increase memory performance and stability auto lets the bios automati cally configure this setting default auto 26
- Options are auto default 1 15 26
- Options are auto default 1 40 26
- Options are auto default 1 63 26
- Options are auto default 5 15 26
- Profileddrvoltage 26
- Profilevttvoltage 26
- Quick and expert allows the channel interleaving rank interleaving channel a timing settings and channel b timing settings items to be configurable options are auto default quick expert 26
- Rank interleaving 26
- The value displayed here is dependent on the cpu being used 26
- Advanced voltage settings 27
- Channel a b misc timing control 27
- Command rate cmd 27
- Dynamic vcore dvid 27
- Graphics dvid 27
- Io latency 27
- Options are auto default 1 12 27
- Options are auto default 1 15 27
- Options are auto default 1 16 27
- Options are auto default 1 255 27
- Options are auto default 1 3 27
- Options are auto default 1 31 27
- Options are auto default 1 63 27
- Round trip latency 27
- The default is auto 27
- 4 standard cmos features 28
- Auto lets the bios automatically detect sata devices during the post default 28
- Configure your sata devices by using one of the three methods below configure your sata devices by using one of the three methods below 28
- Date mm dd yy 28
- Detection of the device during the post for faster system startup 28
- Determines whether to enable specific streams within the cpu and chipset default enabled 28
- Dram voltage 28
- Enables or disables intel virtualization technology virtualization enhanced by intel virtualization tech nology will allow a platform to run multiple operating systems and applications in independent partitions with virtualization one computer system can function as multiple virtual systems default enabled 28
- Ide channel 0 1 master 28
- Isochronous support 28
- Miscellaneous settings 28
- None if no sata devices are used set this item to none so the system will skip the 28
- Note this item is present only when you install a cpu that supports this feature for more information about intel cpus unique features please visit intel s website 28
- Sets the system date 28
- Sets the system time 28
- The default is auto 28
- Time hh mm ss 28
- Virtualization technolog 28
- 5 advanced bios features 29
- Access mode access mode sets the hard drive access mode options are auto default chs lba large 29
- Access mode access mode sets the hard drive access mode options are auto default large 29
- Allows you to determine whether the system will stop for an error during the post 29
- Auto lets the bios automatically detect sata devices during the post default none if no sata devices are used set this item to none so the system will skip the 29
- Capacity capacity approximate capacity of the currently installed hard drive 29
- Configure your sata devices by using one of the two methods below configure your sata devices by using one of the two methods below 29
- Cylinder cylinder number of cylinders 29
- Detection of the device during the post for faster system startup 29
- Drive access mode is set to chs 29
- Extended ide drive 29
- Halt on 29
- Hard disk boot priority 29
- Head head number of heads 29
- Ide channel 2 3 master 29
- Landing zone landing zone landing zone 29
- Manual allows you to manually enter the specifications of the hard drive when the hard 29
- Memory 29
- Note this item is present only when you install a cpu that supports this feature for more information about intel cpus unique features please visit intel s website 29
- Options are all errors no errors all but keyboard default options are all errors no errors all but keyboard default 29
- Precomp precomp write precompensation cylinder 29
- Sector sector number of sectors 29
- The following fields display your hard drive specifications if you wish to enter the parameters manually the following fields display your hard drive specifications if you wish to enter the parameters manually refer to the information on the hard drive 29
- These fields are read only and are determined by the bios post 29
- To exit this menu when finished 29
- Delay for hdd secs 30
- Efi cd dvd boot option 30
- First second third boot device 30
- Full screen logo show 30
- Hdd s m a r t capability 30
- Init display first 30
- Limit cpuid max to 30
- No execute memory protec 30
- Password check 30
- Quick boot 30
- 6 integrated peripherals 31
- Activates the onboard graphics only when no pci express graphics card is installed default activates the onboard graphics only when no pci express graphics card is installed default 31
- Ahci ahci configures the sata controller to ahci mode advanced host controller interface ahci is an interface specification that allows the storage driver to enable advanced serial ata features such as native command queuing and hot plug 31
- Allows usb keyboard to be used in ms dos default enabled 31
- Allows you to decide whether to configure the sata controller integrated in the intel h61 chipset to ahci mode 31
- Always activates the onboard graphics whether or not a pci express graphics card is installed if you always activates the onboard graphics whether or not a pci express graphics card is installed if you wish to set up a dual display configuration set this item to always enable 31
- Always enable always enable 31
- Default 31
- Determines whether to detect usb storage devices including usb flash drives and usb hard drives during the post default enabled 31
- Disabled disabled allows the sata controllers to operate in legacy ide mode 31
- Disabled disabled will turn off all of the usb functionalities below 31
- Enable if no ext peg enable if no ext peg 31
- Enabled 31
- Enables or disables the integrated usb controller default enabled 31
- Enables or disables the onboard graphics function 31
- Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con troller ms dos for example will use only this memory for display options are 32mb 2mb for gtt 480mb 2mb for gtt default 64mb 2mb for gtt 31
- Ide ide configures the sata controller to ide mode default 31
- In legacy mode the sata controllers use dedicated irqs that cannot be shared with in legacy mode the sata controllers use dedicated irqs that cannot be shared with other device set this option to disabled if you wish to install operating systems that do not support native mode 31
- On chip frame buffer size 31
- Onboard vga 31
- Sata ahci mode intel h61 chipset 31
- Sata port0 1 native mode intel h61 chipset 31
- Specifies the operating mode of the integrated sata controllers 31
- Usb controllers 31
- Usb legacy function 31
- Usb storage function 31
- 7 power management setup 32
- Allows you to decide whether to activate the boot rom integrated with the onboard lan chip 32
- Azalia codec 32
- Default disabled default disabled 32
- Enables or disables the first serial port and specifies its base i o address and corresponding interrupt options are auto 3f8 irq4 default 2f8 irq3 3e8 irq4 2e8 irq3 disabled 32
- Enables or disables the onboard audio function default auto 32
- Enables or disables the onboard lan function default enabled if you wish to install a 3rd party add in network card instead of using the onboard lan set this item to disabled 32
- Enables or disables the onboard parallel port lpt and specifies its base i o address and correspond ing interrupt options are 378 irq7 default 278 irq5 3bc irq7 disabled 32
- If you wish to install a 3rd party add in audio card instead of using the onboard audio set this item to if you wish to install a 3rd party add in audio card instead of using the onboard audio set this item to disabled 32
- Note supported on windows 7 vista operating system only 32
- Onboard h w lan 32
- Onboard lan boot rom 32
- Onboard parallel port 32
- Onboard serial port 1 32
- Parallel port mode 32
- Selects an operating mode for the onboard parallel lpt port options are spp standard parallel port default epp enhanced parallel port ecp extended capabilities port ecp epp 32
- Smart lan lan cable diagnostic function 32
- This motherboard incorporates cable diagnostic feature designed to detect the status of the attached lan cable this feature will detect cabling issue and report the approximate distance to the fault or short 32
- Acpi suspend type 33
- Hpet mod 33
- Hpet suppor 33
- Pme event wake up 33
- Power on by keyboard 33
- Power on by mouse 33
- Power on by ring 33
- Resume by alarm 33
- Soft off by pwr bttn 33
- 8 pc health status 34
- Ac back function 34
- Again without entering the password to clear the password settings 34
- Case opened 34
- Current system cpu temperature 34
- Current voltage v vcore ddr15v 12v vtt 34
- Determines the state of the system after the return of power from an ac power loss 34
- Determines whether to let the system consume less than 1w power in s5 shutdown state default disabled 34
- Displays current system cpu temperature 34
- Displays the current system voltages 34
- Displays the detection status of the chassis intrusion detection device attached to the motherboard ci header if the system chassis cover is removed this field will show yes otherwise it will show no to clear the chassis intrusion status record set reset case open status to enabled save the settings to the cmos and then restart your system 34
- Erp support 34
- Full on full on the system is turned on upon the return of the ac power 34
- Kb power on password 34
- Keeps or clears the record of previous chassis intrusion status enabled clears the record of previous chassis intrusion status and the case opened field will show no at next boot default disabled 34
- Memory memory the system returns to its last known awake state upon the return of the ac power 34
- Note when this item is set to note when this item is set to enabled the following four functions will become unavailable 34
- Pme event wake up power on by mouse power on by keyboard and wake on lan pme event wake up power on by mouse power on by keyboard and wake on lan 34
- Reset case open status 34
- Soft off soft off the system stays off upon the return of the ac power default 34
- 9 load fail safe defaults 35
- Allows the system to emit warning sound if the cpu system fan is not connected or fails check the fan condition or fan connection when this occurs default disabled 35
- Allows you to control the cpu fan speed this item is configurable only when cpu smart fan control is set to manual options are 0 5 pwm value 35
- Allows you to determine whether to enable the cpu fan speed control function and adjust the fan speed 35
- C 2 0 pwm value 35
- Cpu smart fan control 35
- Cpu system fan fail warning 35
- Cpu warning temperature 35
- Current cpu system fan speed rpm 35
- Disabled disabled allows the cpu fan to run at full speeds 35
- Displays current cpu system fan speed 35
- Key to load the safest bios default settings in case system instability occurs you may try to load fail safe defaults which are the safest and most stable bios settings for the motherboard 35
- Manual manual allows you to control the cpu fan speed under the slope pwm item 35
- Normal normal allows the cpu fan to run at different speeds according to the cpu temperature you can adjust the fan speed with easytune based on your system requirements default 35
- Sets the warning threshold for cpu temperature when cpu temperature exceeds the threshold bios will emit warning sound options are disabled default 6 35
- Silent silent allows the cpu fan to run at slow speeds 35
- Slope pwm 35
- 10 load optimized defaults 36
- 11 set supervisor user password 36
- Again the message password disabled will appear indicating the password has been can celled 36
- Key to load the optimal bios default settings the bios defaults settings help the system to operate in optimum state always load the optimized defaults after updating the bios or after clearing the cmos values 36
- Supervisor password 36
- The bios setup program allows you to specify two separate passwords 36
- User password 36
- When a system password is set and the when a system password is set and the password check item in advanced bios features is set to setup you must enter the supervisor password for entering bios setup and making bios changes 36
- When the when the password check item is set to system you must enter the supervisor password or user password at system startup and when entering bios setup 36
- When the when the password check item is set to system you must enter the supervisor password or user password at system startup to continue system boot in bios setup you must enter the supervisor password if you wish to make changes to bios settings the user password only allows you to view the bios settings but not to make changes 36
- 12 save exit setup 37
- 13 exit without saving 37
- To return to the bios setup main menu 37
- Chapter 3 drivers installation 38
- Our commitment to preserving the environment 39
- Regulatory notices 39
- Regulatory statements 39
- Restriction of hazardous substances rohs directive statement 39
- Waste electrical electronic equipment weee directive statement 39
- Weee symbol statement 39
- Contact us 40
- Gigabyte global service system 40
- To submit a technical or non technical sales market ing question please link to http ggts gigabyte com tw then select your language to enter the system 40
Похожие устройства
- Gigabyte GA-H61M-DS2 R2 (rev. 1.0) Инструкция
- Indesit NWK 9128 L Руководство пользователя
- Gigabyte GA-B75M-S (rev. 1.0) Инструкция
- Indesit NWSB 61051 Руководство пользователя
- Indesit NWU 585 L Руководство пользователя
- Gigabyte GA-X99M-Gaming 5 (rev. 1.1) Инструкция
- Gigabyte GA-X99M-Gaming 5 (rev. 1.0) Инструкция
- Gigabyte GA-X99-Ultra Gaming-EK (rev. 1.0) Инструкция
- Gigabyte GA-X99-Ultra Gaming (rev. 1.1) Инструкция
- Gigabyte GA-X99-Ultra Gaming (rev. 1.0) Инструкция
- Gigabyte GA-Z97X-Gaming 3 (rev. 1.1) Инструкция
- Gigabyte GA-Z97X-Gaming 3 (rev. 1.0) Инструкция
- Indesit PWC 7105W Руководство пользователя
- Indesit PWC 7108S Руководство пользователя
- Gigabyte GA-Z97N-Gaming 5 (rev. 1.0) Инструкция
- Indesit PWC 71272 W Руководство пользователя
- Indesit PWC 7128S Руководство пользователя
- Gigabyte GA-Z97MX-Gaming 5 (rev. 1.0) Инструкция
- Indesit PWDE 71257 S Руководство пользователя
- Indesit PWE 61041 S Руководство пользователя