![Gigabyte GA-N3160N-D2H [21/32] Integrated graphics device](/img/pdf.png)
Gigabyte GA-N3160N-D2H [21/32] Integrated graphics device
![Gigabyte GA-N3160N-D2H [21/32] Integrated graphics device](/views2/1669275/page21/bg15.png)
& Turbo Mode
Allows you to determine whether to enable the Intel
®
CPU Turbo Boost technology. Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
` IntelIGDConguration
Thissectionprovidesonboardgraphics-relatedcongurationoptions.
& Integrated Graphics Device
Enables or disables the onboard graphics function. (Default: Enabled)
` SATAConguration
& SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Interface Speed
Allows you to set the operation mode of the SATA ports to Gen 1, Gen 2, or Gen 3. (Default: Gen 3)
` SATA Port 0/1
& Port 0/1
Enables or disables each SATA port. (Default: Enabled)
` NetworkStackConguration
& Network stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
the Windows Deployment Services server. (Default: Disabled)
& Ipv4 PXE Support
EnablesordisablesIPv4PXESupport.ThisitemiscongurableonlywhenNetwork stack is enabled.
& Ipv6 PXE Support
EnablesordisablesIPv6PXESupport.ThisitemiscongurableonlywhenNetwork stack is enabled.
& PXE boot wait time
Allows you to set the waiting time for cancelling the PXE boot by pressing the <ESC> key. This item is
congurableonlywhenNetwork stack is enabled.
& Media detect count
Allowsyoutosetthenumberoftimestocheckthepresenceofmedia.Thisitemiscongurableonlywhen
Network stack is enabled.
` CSMConguration
& CSM Support
Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.
Enabled Enables UEFI CSM. (Default)
Disabled Disables UEFI CSM and supports UEFI BIOS boot process only.
& Network
Allows you to select whether to enable the UEFI or legacy option ROM for the LAN controller.
Do not launch Disables option ROM.
UEFI Enables UEFI option ROM only. (Default)
Legacy Enables legacy option ROM only.
ThisitemiscongurableonlywhenCSM Support is set to Enabled.
- 21 -
Содержание
- Ga n3160n d2h 1
- Rev 1001 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 7 3
- Chapter 3 appendix 7 3
- Ga n3160n d2h motherboard layout 3
- Table of contents 3
- Box contents 4
- Ga n3160n d2h 4
- Ga n3160n d2h motherboard 5 two sata cables 4
- Ga n3160n d2h motherboard layout 4
- Motherboard driver disk 5 i o shield 4
- User s manual 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the memory 8
- 4 installing an expansion card 8
- 5 back panel connectors 8
- D sub port 8
- Dualchannelmemoryconfiguration 8
- Dvi d port 8
- Ps 2 keyboard and ps 2 mouse port 8
- Hdmi port 9
- Line in rear speaker out blue 9
- Line out front speaker out green 9
- Mic in center subwoofer speaker out pink 9
- Rj 45 lan port 9
- Usb 2 1 port 9
- Usb 3 gen 1 port 9
- 6 internal connectors 10
- 2 atx_12v atx 2x2 12v power connector and 2x12 main power connector 11
- 4 cpu_fan sys_fan fan headers 11
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 11
- Overheating overheating may result in damage to the cpu or the system may hang 11
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 11
- The motherboard has a 3 pin cpu fan header cpu_fan and a 4 pin system fan header sys_fan most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 11
- Thesefanheadersarenotconfigurationjumperblocks donotplaceajumpercapontheheaders 11
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 11
- With the use of the power connector the power supply can supply enough stable power to all the components onthemotherboard beforeconnectingthepowerconnector firstmakesurethepowersupplyisturned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 11
- Asm1061 12
- Sata3 0 1 sata 6gb s connectors controlled by inte 12
- Sata3 2 3 sata 6gb s connectors controlled by asmedi 12
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device 12
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 13
- F_usb usb 2 1 header 13
- F_usb30 usb 3 gen 1 header 13
- From the power outlet to prevent damage to the usb bracket 13
- Theheaderconformstousb2 1 specification eachusbheadercanprovidetwousbportsviaan optional usb bracket for purchasing the optional usb bracket please contact the local dealer 13
- Theheaderconformstousb3 gen1specificationandcanprovidetwousbports forpurchasingthe optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 13
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one damage to your devices may occur if the battery is 14
- Bat battery 14
- Connect the power switch reset switch and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 14
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 14
- Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 14
- F_panel front panel header 14
- Hd hard drive activity led blue connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 14
- Nc purple no connection 14
- Or uncertain about the battery model 14
- Pin no definition 14
- Pled power led yellow 14
- Pw power switch red connectstothepowerswitchonthechassisfrontpanel youmayconfigurethewaytoturnoffyour system using the power switch refer to chapter 2 bios setup power management for more information 14
- Replaced with an incorrect model 14
- Res reset switch green connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 14
- Rtc power 14
- S3 s4 s5 off 14
- System status led 14
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 14
- Thebatteryprovidespowertokeepthevalues suchasbiosconfigurations date andtimeinformation in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 14
- Used batteries must be handled in accordance with local environmental regulations 14
- You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 unplug the the battery cable from the battery cable header and wait for one minute 3 plug in the battery cable 4 plug in the power cord and restart your computer 14
- Coma comb serial port headers 15
- F_audio front panel audio header 15
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 15
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 15
- Thefrontpanelaudioheadersupportshighdefinitionaudio hd youmayconnectyourchassisfront panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 15
- Tpm trusted platform module header 15
- You may connect a tpm trusted platform module to this header 15
- After system restart go to bios setup to load factory defaults select load optimized defaults or 16
- Always turn off your computer and unplug the power cord from the power outlet before clearing 16
- Ci chassis intrusion header 16
- Clr_cmos clear cmos jumper 16
- Connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 16
- Lpt parallel port header 16
- Manuallyconfigurethebiossettings refertochapter2 biossetup forbiosconfigurations 16
- Speaker speaker header 16
- The cmos values 16
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 16
- This motherboard provides a chassis detection feature that detects if the chassis cover has been removed this function requires a chassis with chassis intrusion detection design 16
- Usethisjumpertoclearthebiosconfigurationandresetthecmosvaluestofactorydefaults toclear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 16
- Chapter 2 bios setup 17
- 1 main 18
- Access level 18
- Displays the current access level depending on the type of password protection used if no password is set the default will display as administrator the administrator level allows you to make changes to all bios settings the user level only allows you to make changes to certain bios settings but not all 18
- Its defaults 18
- Keytosetthedesired value 18
- Keytosetthedesiredvalue 18
- Main menu help the on screen description of a highlighted setup option is displayed on the bottom line of the main menu submenu help 18
- Sample bios version f1 18
- Selects the default language used by the bios 18
- System date 18
- System language 18
- System time 18
- The bios setup menus described in this chapter are for reference only and may differ by bios 18
- This section provides information on your motherboard model bios version and memory information you can also select the default language used by the bios and manually set the system time 18
- To accept or enter a sub menu 18
- To exit the help screen help for each item is in the item help block on the right side of the submenu 18
- Version 18
- When the system is not stable as usual select the restore defaults item to set your system to 18
- 2 advanced 19
- Allows you to set the memory voltage options are 1 5v 1 0v auto auto lets the bios automatically configurethissetting default auto 19
- Configuresthewaytoturnoffthecomputerinms dosmodeusingthepowerbutton 19
- Ddr voltage control 19
- Delay 4 sec press and hold the power button for 4 seconds to turn off the system if the power button is pressed for less than 4 seconds the system will enter suspend mode 19
- Determines the state of the system after the return of power from an ac power loss 19
- Enables or disables dummy load when the power supply is at low load a self protection will activate causing it to shutdown or fail if this occurs please set to enabled auto letsthebiosautomaticallyconfigurethis setting default auto 19
- Enables or disables the onboard lan function default enabled 19
- If you wish to install a 3rd party add in network card instead of using the onboard lan set this item to if you wish to install a 3rd party add in network card instead of using the onboard lan set this item to disabled 19
- Instant off press the power button and then the system will be turned off instantly default 19
- Last state the system returns to its last known awake state upon the return of the ac power 19
- Onboard lan controller 19
- Os selection 19
- Power loading 19
- Power off the system stays off upon the return of the ac power default 19
- Power on the system is turned on upon the return of the ac power 19
- Realtek pcie gbe family controller 19
- Restore ac power loss 19
- Selects the target os default windows 8 10 19
- Soft off by pwr bttn 19
- Thissub menuprovidesinformationonlanconfigurationandrelatedconfigurationoptions 19
- Case intrusion prompt 20
- Case open 20
- Cpu system fan speed 20
- Cpu temperature system temperature 20
- Cpuconfiguration 20
- Hardware monitor 20
- Intel virtualization technology 20
- Limit cpuid maximum 20
- Parallelportconfiguration 20
- Power technology 20
- Reset case open status 20
- Serialport1 2configuration 20
- Sio misc functions 20
- Sioconfiguration 20
- Vcore vcc3 12v vcc cpu_vaxg vnn ddr1_35v 20
- Csm support 21
- Csmconfiguration 21
- Integrated graphics device 21
- Inteligdconfiguration 21
- Ipv4 pxe support 21
- Ipv6 pxe support 21
- Media detect count 21
- Network 21
- Network stack 21
- Networkstackconfiguration 21
- Port 0 1 21
- Pxe boot wait time 21
- Sata controller 21
- Sata interface speed 21
- Sata port 0 1 21
- Sataconfiguration 21
- Turbo mode 21
- Intel rmt support 22
- Intelrmtconfiguration 22
- Legacy usb support 22
- Mass storage devices 22
- Offboardsatacontrollerconfiguration 22
- Other pci devices 22
- Port 60 64 emulation 22
- Storage 22
- Usb mass storage driver support 22
- Usbconfiguration 22
- Xhci legacy support 22
- 3 security 23
- Administrator password 23
- Againwhenpromptedtoconfirm 23
- Displays the current secure boot state 23
- Displays the current system mode 23
- Displays the vendor keys 23
- Displaysalistofconnectedharddrivesandallowsyoutosetapasswordforaspecificharddrive this item appears only when a hard drive is installed 23
- Hddsecurityconfiguration 23
- Note beforesettingtheuserpassword besuretosettheadministratorpasswordfirst note beforesettingtheuserpassword besuretosettheadministratorpasswordfirst 23
- Secure boot 23
- Secure boot menu 23
- System mode 23
- User password 23
- Vendor keys 23
- You must enter the administrator password or user password at system startup and when entering bios setup differing from the user password the administrator password allows you to make changes to all bios settings 23
- You must enter the administrator password or user password at system startup and when entering bios setup however the user password only allows you to make changes to certain bios settings but not all 23
- 4 boot 24
- Allows you to determine whether to display the gigabyte logo at system startup disabled skips the gigabyte logo when the system starts up default enabled 24
- Allowsyoutoconfigurethenumberofsecondstostayinbiossetuppromptscreen default 6 24
- Allowsyoutoconfigurethesecurebootmode default custom 24
- Bootup numlock state 24
- Enables or disables fast boot to shorten the os boot process default enabled 24
- Enables or disables numlock feature on the numeric keypad of the keyboard after the post default on 24
- Enables or disables the secure boot function secure boot requires all the applications that are running duringthebootingprocesstobepre signedwithvaliddigitalcertificates thisway thesystemknowsall thefilesbeingloadedbeforewindows8loadsandgetstotheloginscreenhavenotbeentamperedwith default disabled 24
- Fast boot 24
- Full screen logo show 24
- Key management 24
- Secure boot 24
- Secure boot mode 24
- Setup prompt timeout 24
- Thissectionprovidesyouwithconfigurationoptionsforsecurebootkeymanagement 24
- Boot option 1 2 3 25
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 25
- Network stack driver support 25
- New boot option policy 25
- Ps2 devices support 25
- Sata support 25
- Usb support 25
- Vga support 25
- 5 save exit 26
- Boot override 26
- Discard changes 26
- Discard changes and reset 26
- Launchefishellfromfilesystemdevice 26
- Restore defaults 26
- Restore user defaults 26
- Save as user defaults 26
- Save changes 26
- Save changes and reset 26
- Chapter 3 appendix 27
- Drivers installation 27
- Battery information 28
- Our commitment to preserving the environment 28
- Regulatory notices 28
- Regulatory statements 28
- Restriction of hazardous substances rohs directive statement 28
- Waste electrical electronic equipment weee directive statement 28
- Weee symbol statement 28
- Canada industry canada ic notices canada avis d industry canada ic 29
- Fcc notice u s a only 29
- Contact us 32
- Gigabyte esupport 32
- To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 32
Похожие устройства
- Gigabyte GA-N3160M-D3P Инструкция
- Gigabyte GA-IMB1900TN Инструкция
- Gigabyte GA-IMB1900N Инструкция
- Gigabyte GA-PICO3350 Инструкция
- Gigabyte GA-AX370-Gaming 3 (rev. 1.x) Инструкция
- Gigabyte GA-AB350M-DS3H (rev. 1.x) Инструкция
- Gigabyte B450M S2H Инструкция
- Gigabyte B450M H Инструкция
- Gigabyte B450M DS3H WIFI Инструкция
- Gigabyte B450M DS3H V2 (rev. 1.0) Инструкция
- Gigabyte B450M DS3H (rev. 1.0) Инструкция
- Gigabyte X570 UD (rev. 1.1) Инструкция
- Gigabyte X570 UD (rev. 1.0) Инструкция
- Gigabyte X399 DESIGNARE EX (rev. 1.0) Инструкция
- Gigabyte TRX40 DESIGNARE (rev. 1.1) Инструкция
- Gigabyte TRX40 DESIGNARE (rev. 1.0) Инструкция
- Gigabyte GA-A320M-S2H (rev. 3.0) Инструкция
- Gigabyte GA-A320M-S2H (rev. 2.0) Инструкция
- Gigabyte GA-A320M-S2H (rev. 1.x) Инструкция
- Gigabyte GA-A320M-H (rev. 3.0) Инструкция