Home
Главная
Gigabyte
Материнская Плата
B450M H
Инструкция Страница: 24

Gigabyte B450M H [24/42] Memory frequency mhz

& System Memory Multiplier

Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD

data. (Default: Auto)

& Memory Frequency (MHz)

 Therstmemoryfrequencyvalueisthenormaloperatingfrequencyofthememorybeingused;thesecond

is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.

 Advanced Memory Settings

ExtremeMemoryProle(X.M.P.)

(Note)

, System Memory Multiplier, Memory Frequency(MHz)

The settings above are synchronous to those under the same items on the Advanced Frequency Settings

menu.

& XMP High Frequency Support

(Note)

 Allowsyoutoselectthecompatibilitylevelforhigh-frequencymemory.Thisitemiscongurableonlywhen

ExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2. (Default: Auto)

& Memory Timing Mode

Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing

settingsbelowtobecongurable.Optionsare:Auto(default),Manual,AdvancedManual.

& ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

isdisplayedaccordingtoyourmemoryspecication.WhenExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2, the value is displayed according to the SPD data on the XMP memory.

` Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus

DriveStrength,DataBusConguration

 Thesesectionsprovidememorytimingsettings.Therespectivetimingsettingscreensarecongurable

only when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot

after you make changes on the memory timings. If this occurs, please reset the board to default values by

loadingoptimizeddefaultsorclearingtheCMOSvalues.

 Advanced Voltage Settings

This sub-menu allows you to set CPU, chipset and memory voltages.

 PC Health

& Reset Case Open Status

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show"No"atnextboot.

& Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/VCORE SOC

Displays the current system voltages.

(Note) This item is present only when you install a CPU and a memory module that support this feature.

- 24 -

Gigabyte B450M H [24/42] Memory frequency mhz

Содержание

Похожие устройства