Gigabyte GA-A320M-D2P (rev. 1.0) [27/39] Administrator password

& Other PCI Device ROM Priority

 AllowsyoutoselectwhethertoenabletheUEFIorLegacyoptionROMforthePCIdevicecontrollerother

than the LAN, storage device, and graphics controllers.

Disabled   DisablesoptionROM.

UEFIOnly   EnablesUEFIoptionROMonly.(Default)

LegacyOnly  EnableslegacyoptionROMonly.

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

& Network Stack

Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

& Ipv6 PXE Support

 EnablesordisablesIPv6PXESupport.ThisitemiscongurableonlywhenNetwork Stack is enabled.

& Ipv6 HTTP Support

 EnablesordisablesHTTPbootsupportforIPv6.ThisitemiscongurableonlywhenNetwork Stack is

enabled.

& Administrator Password

 Allowsyoutocongureanadministratorpassword.Press<Enter>onthisitem,typethepassword,and

thenpress<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress

<Enter>. You must enter the administrator password (or user password) at system startup and when entering

BIOS Setup. Differing from the user password, the administrator password allows you to make changes to

To cancel the password, press <Enter> on the password item and when requested for the password, enter

thecorrectonerst.Whenpromptedforanewpassword,press<Enter>withoutenteringanypassword.

Press<Enter>againwhenpromptedtoconrm.

 NOTE:BeforesettingtheUserPassword,besuretosettheAdministratorPasswordrst.

- 27 -