Zelmer 1100 [63/64] After operation

Zelmer 1100 [63/64] After operation
63
16a
16b
AIR-OUTLET FILTER REPLACING
Air-outlet lter – „ACF Mikroltr” (15)
Open up the accessories compartment lid (13).
Press the lter cover locker strong (14) and lean it outside (A).
Remove the “ACF Microlter”.
Insert a new “ACF Microlter”. Make sure
the gasket ts tightly.
Insert the lter lid so that three buckles
located at the bottom part of the lid got
into the holes in vacuum cleaner casing,
press the lter lid so that the lid
locking bar get trapped.
Air-outlet lter – „HEPA” (15)
The vacuum cleaner is optionally equipped with HEPA lter.
The cassette with HEPA lter provides efcient usage for about 1 year.
Follow the instructions for replacing the “ACF Microlter”.
Insert a new “HEPA” lter in the place of the old one.
AFTER OPERATION
Unplug from outlet.
Rewind the cord pressing . button. Hold the plug when rewinding, do not allow the cord to get
entangled and the plug to bump the casing.
Remove the nozzle from the tube.
ATTENTION! You can store the vacuum cleaner in
both horizontal and vertical positions. The hose
can remain tted, but please be careful not to bend
it to much.
Insert the hook on nozzle-brush into the runners for
horizontal (16a) or vertical (16b) storage.
CLEANING AND MAINTENANCE
Remember to check if the vacuum cleaner is unplugged before cleaning and maintenance.
Clean the casing and bag chamber with damp cloth (it can be wet with wash – up liquid) dry or wipe
up to get it dry.
Do not use abrasive agents or dissolvent.
Vacuum the nozzle-brush, small brush or special accessories with a gap nozzle from time to time.
WHAT TO DO WHEN…?
You can hear characteristic „uttering” sound, indicating that safety valve is in operation (the
vacuum cleaner is equipped with safety valve):
check the bag and accessories, unblock or exchange the dust bag and lters.
It is difcult to move the nozzle:
reduce the suction power; cleaning efciency will not be lower.
The dust bag has been damaged:
exchange the dust bag and lters.
An electric fuse functioned:
check if there are any other electric appliances connected to the same electric circuit,
if the fuse functions repeatedly, bring your vacuum cleaner to service desk.
The vacuum cleaner is not in operation, the casing or power cord is damaged:
bring your vacuum cleaner to service desk.
The vacuum cleaner suction is low:
replace the dust bag and lters,
check the suction tubes, hose and nozzle – unblock.
13
14
A
HEPA H11
15
Mikrolter ACF
Air Compact Filter
Vertical storageHorizontal
storage

Содержание

Скачать