Zelmer 28Z020 [81/84] Dry ironin

Zelmer 28Z022 [81/84] Dry ironin
81GW28-029_v02
How to ll the water
Disconnect the iron from mains supply outlet.
Move the Steam Control Knob (7)
to position.
Release the water inlet cover (5)
and ll water through the water inlet
hole.
Fill up to the „ MAX” level marked on
the side of water tank.
Close the water inlet cover (5).
Note:
For best result, it is advisable to use demineralised water or distilled
water. Do not use chemically descaled water or any other liquids.
Preparation for operation – rst ironing
Remove any protective lms or sticker from the soleplate (1) and the
cabinet, if any.
Unwind and straighten the power cord (13).
Fill the iron as described in “How to ll water”.
Connect the iron to a suitable mains supply outlet.
Turn the Temperature Dial (2) in clockwise direction to ●●● position
control light (11) glows.
Control light goes off when the required temperature is reached.
Move the Steam Control Knob (7) to position.
Steam starts coming out from the holes in the sole plate after putting
the iron in horizontal position and after pressing the Burst of Steam
Button (9).
Begin rst time ironing with an old towel.
The steam is not generated after the water tank is emptied.
The preparation work is completed. The iron is now ready for proper use.
After operation
Move the Temperature Dial (2) in anti-clockwise direction to MIN”;
the iron is switched off.
Move the Steam Control Knob (7) to position.
Disconnect the iron from mains supply outlet.
When the iron gets cool completely, store it vertically in a safe place.
Spraying
This function can be used any time
and is not affect any setting.
Fill the water tank as described in
How to Fill Water.
Aim the nozzle (6) to the garment.
Press the Spray Button (10).
It may be necessary to press the spray button a few times to start this
function.
Dry ironingAlways follow the garment manufacturer’s ironing
instructions mentioned at the garment label.
Unwind and straighten the power cord (13).
Move the Steam Control Knob (7) to position.
Connect the iron to a suitable mains supply outlet.
Turn the Temperature Dial (2) in clockwise direction to; set ●, ●● or
●●● position.
Control light (11) glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The
iron is now ready for use.
Move the Temperature Dial (2) in anti-clockwise direction to MIN”;
the iron is switched off.
Disconnect the iron from mains supply outlet.
When the iron gets cool completely, store it vertically in a safe place.
Steam ironing Always follow the garment manufacturer’s
ironing instructions mentioned at the garment label.
Unwind and straighten the power cord (13).
Fill the iron as described in “How to ll water”.
Connect the iron to a suitable mains supply
outlet.
Turn the Temperature Dial (2) in clockwise
direction to ●●● position. (For optimum steam
quality, do not use or ●● setting for steam
ironing).
Control light (11) glows, indicating that the iron is on.

Содержание

Похожие устройства

Скачать