ASRock D1541D4U-2T8R [23/52] Network bonding configuration

2.5.8 Network Bonding Conguration

This page is used to configure the network bonding configuration for

network interfaces.

NOTE: A minimum of 2 network interfaces are required to enable Network bonding

for the device.

Network Bonding

Check this option to enable network bonding for network interfaces.

NOTE: If VLAN is enabled for slave interfaces, then Bonding cannot be enabled.

VLAN can be disabled under Conguration -> Network -> VLAN.

Default Interfaces

Choose any one of the bonding interfaces for conguring active slave(s).

Auto Conguration

Enable this option to configure the interfaces in service configuration

automatically.

NOTE: If Auto conguration is disabled, then interfaces in services can be congured

via IPMI command. If Auto conguration is enabled, then all the services will be

restarted automatically.

Save

Click “Save” to save the current changes.

NOTE: Disabling bonding will disable the Bonding-VLAN conguration.