Daikin UAT180CGXY1 [7/16] Installation of the unit

5

INSTALLATION OF THE UNIT

English

(A) Location For Installation

Install the unit in such way that air distributed by the unit cannot be drawn in again (as in the case of short

circuit of discharge air). Allow suffi cient space for maintenance around the unit.

When two or more units are installed in a location, they must be positioned such that one unit will not be

taking the discharge air from another unit.

Ensure that there is no obstruction of air fl ow into or out of the unit. Remove obstacles which block air intake

A place where air outlet port is not exposed to strong wind.

A place where the air discharge and operating sound level will not annoy the neighbours.

The location where it is not accessible by general public.

(B) Duct Construction

This unit are equipped with supply and return air openings. Duct connection to the unit should be made with

duct fl anges and secured directly to the air openings with fl exible duct connectors to avoid normal noise

transmission.

To prevent air leakage, all duct seams should be sealed.

Ducts in the spaces that not air-conditioned, must be insulated.

Ducts exposed to the outside must be weather proofed.

The insulation should be added at 4 corners of the chain to prevent the damage of the panel when lifting.

Note:

Unit shown in diagram is UAT300C. Other models will follow the same method in lifting.

–

–

–

•

•

•

–

–

–

–

–

Chain

Spreader bar