Teka DA 90 [4/8] _________________________________________________________

ENG

TEKA INDUSTRIAL S.A. reserves the right to make changes and corrections to its products as

it deems necessary, without altering their basic characteristics.

During cleaning and maintenance work,

make sure the safety instructions set out

on page 10 are complied with.

• If your kitchen hood is made from stainless

steel, use proprietary cleaners mentioned

in the product instructions.

• Never use metallic scourers, nor abrasive

or corrosive products.

• Dry the kitchen hood using a cloth that

does not produce fibres.

To remove the filters from their fittings, press

lightly on the locks and then pull them off.

The metal filters can be cleaned by soaking

them in hot water with neutral detergent until

the fat dissolves and then rinsing them under

the tap or using special anti-grease products.

They can also be washed in a dishwasher. In

this case, it is advisable to stack them

vertically to avoid food residues to stick to

them.

Cleaning in a dishwasher may damage the

metallic surface (blackening it), although this

will not affect its fat retention capacity.

Once clean, leave them to dry off and then fit

them onto the kitchen hood.

Proceed as follows:

• Unscrew the lamp cap trimming cover.

• Change the broken/ burnt out lamp.

Maximum lamp power is 20 W (G-4).

• Screw in the lamp cap trimming cover.

Cleaning the metal filters

Cleaning the hood body

Cleaning and maintenance

_________________________________________________________

Problem solving

Proceed with the following checks before calling the Technical Service:

Changing light bulbs

Sizes and specifications

See page 30.