Planet FSD-2405 [13/18] Troubleshooting

4. TROUBLESHOOTING

This chapter contains information to help you solve issues. If Fast Ethernet

Switch is not functioning properly, make sure the Ethernet Switch was set up

according to instructions in this manual.

Some stations cannot talk to other stations located on the other port

Solution:

The address table may contain older information than of the address

table of that node. Please power down to refresh the address

information.

Performance is bad

Solution:

Check the full duplex status of the Fast Ethernet Switch. If the Fast

Ethernet Switch is set to full duplex and the partner is set to half duplex,

then the performance will be poor.

Why the Switch doesn’t connect to the network

Solution:

Check the LNK/ACT LED on the Switch

Try another port on the Switch

Make sure the cable is installed properly

Make sure the cable is the right type

Turn off the power. After a while, turn on power again