Planet WAP-4033PE [9/38] Reset button

microwave ovens, heavy-duty motors, fluorescent lights and other industrial equipments. Keep the

number of walls or ceilings between AP and clients as few as possible. Otherwise the signal strength

may be seriously reduced. Place WAP-4033PE in a open space or add additional WAP-4033PE as

needed to improve the coverage.

2. Environmental factors

The wireless network is easily affected by many environment factors. Every environment is unique

with different obstacles, construction materials, weather, etc. It is hard to determine the exact

operation rage of WAP-4033PE in a specific location without testing.

3. Antenna adjustment

The bundle antenna of WAP-4033PE is adjustable. Firstly install the antenna pointing straight up,

then smoothly adjust it if the radio signal strength is poor. But the signal reception is definitely weak

in some certain areas, such as location right down the antenna.

Moreover, the original antenna of WAP-4033PE can be replaced with other external antennas to

extend the coverage. Please check the specification of the antenna you want to use, and make sure

it can be used on WAP-4033PE.

4. WLAN Type

If WAP-4033PE is installed in an 802.11b and 802.11g mixed WLAN, its performance will reduced

significantly. Because every 802.11g OFDM packet needs to be preceded by an RTS-CTS or CTS

packet exchange that can be recognized by legacy 802.11b devices. This additional overhead

lowers the speed. If there are no 802.11b devices connected, or if connections to all 802.11b devices

are denied so that WAP-4033PE can operate in 11g-only mode, then its data rate should actually

54Mbps.

1.6 Reset Button

WAP-4033PE provides a Reset button on the rear panel for user to reset or set WAP-4033PE

configuration to factory default by hardware.

Time Active

Press less than 5 Sec. WAP-4033PE will re-boot itself, keeping your original configurations

Press more than 5 Sec. WAP-4033PE will reset itself to the factory default settings