Planet WAP-4035 [25/40] Security

The access point will use the highest possible selected transmission rate to

transmit the data packets.

Preamble Type Preamble type defines the length of CRC block in the frames during the

wireless communication. “Short Preamble” is suitable for high traffic wireless

network. “Long Preamble” can provide more reliable communication.

Broadcast ESSID If you enable “Broadcast ESSID”, every wireless station located within the

coverage of this access point can discover this access point easily. If you are

building a public wireless network, enabling this feature is recommended.

Disabling “Broadcast ESSID” can provide better security.

IAPP If you enable “IAPP”, the access point will automatically broadcast

information of associated wireless stations to its neighbors. This will help

wireless station roaming smoothly between access points. Disabling “IAPP”

can provide better security.

802.11g Protection This is also called CTS Protection. It is recommended to enable the

protection mechanism. This mechanism can decrease the rate of data

collision between 802.11b and 802.11g wireless stations. When the

protection mode is enabled, the throughput of the AP will be a little lower due

to many of frame traffic should be transmitted.

After configuration complete, please click “Apply” button to save the configuration. Then you will

see a screen to prompt you the settings are save successfully. You may press “Continue” for

configure other settings or “Apply” to restart WAP-4035 with new configuration.

3.4 Security

This Access Point provides complete wireless LAN security functions, includes WEP, 802.1x,

802.1x with WEP, WPA-PSK and WPA RADIUS. With these security functions, you can prevent

your wireless LAN from illegal access. Please make sure your wireless stations use the same

security mechanism. In default, the security option is “Disable”.

Note: This access point can act as a station and an AP at the same time in “Universal

Repeater” mode. The security settings only apply to AP operation in “Universal Repeater” mode.

The station operation has no security.