Ardesto WMH-B65 [36/48] Washing

WORKING SEQUENCE

Unpack the machine and read instructions on safe installation, use and maintenance

presented in this Manual.

Place the washing machine on a stable, at surface.

After transportation of the washing machine in cold weather, it is necessary to allow it to

stand without packing at room temperature for at least two hours before connecting to

the electrical network!

Before using the new machine it is recommended to clean the internal surfaces of the

washing tank being in contact with laundry rst with a wet and then with a dry cloth,

and check the operation of the machine at idle without loading the laundry. To do this,

connect the water inlet hose and place the water drain hose in a horizontal position in

the drain tank. Pour water into the tank (by turning on the tap), plug the power cord into

a convenience outlet with a reliable grounding, and set the machine operating time at

about two minutes with the help of the washer timer knob, the agitator shall rotate. It is

prohibited to switch on the machine when the water tank is not lled with water.

WASHING

Water at washing and rinsing should have the temperature corresponding to the fabric.

• Cotton and linen:

Washing 45-50 °C

Rinsing 20-25 °C

• Wool and silk:

Washing 25-35 °C

Rinsing 15-25°C

The following preparative steps should be carried out in the following sequence:

1. Plug the power cord into a socket with a reliable grounding.

2. Fill the tank with water up to the mark. The maximum permissible water level in the tank

corresponds to the upper mark.