Ardesto WMH-B65 [38/48] Do not use gasoline based cleaning agents as they may damage the plastic parts of the machine

Laundry in the tank should be in constant motion during

washing.

If laundry does not rotate, it is necessary to remove one or two clothes in order to achieve

stable rotation of laundry in the tank.

If it is necessary to stop the machine during washing, turn the washer timer knob to the

zero position, the engine of the machine will stop.

To rinse the laundry after completing the washing cycle, ll clean water without adding

detergents into the washing tank, or wring the laundry out before rinsing. The last rinsing

cycle is the cleanest, so it does not require a lot of water.

Rinsing shall be performed in the following sequence:

Pour water into the tank with laundry for rinsing.

Set the required rinsing time by turning the washer timer knob.

Rinsing time 3-5 minutes

Number of rinsing cycles: 2-3

After completing washing, clean the washing tank with clean water, drain the water. Water

drain is carried out by turning the mode switch to the «water drain» position. Be sure to

pay attention to the position of the drain hose, the end of the drain hose should be at least

15 cm over the basement of the machine, and immersed in water.

When all the water is drained out of tanks and hydraulic system, fasten the drain hose

vertically on the body of the machine:

• Disconnect the water intake hose.

• Disconnect the electrical cord from the socket and wind it gently.

• Clean the drain lter.

• Wipe dry the inner surface of the tank, the body of the machine, the lid, the cord and

other parts, and leave the lid open for airing and complete drying.

Do not use gasoline-based cleaning agents as they may

damage the plastic parts of the machine.