Cecotec PerfectCountry BBQ [16/34] Operation

ENGLISH

PERFECTCOUNTRY BBQ

Note: the grill plate can only be used with this grill holder.

Warning: Do not unscrew these plastic feet under the grill plate. Removing the plastic feet

would reduce the gap between the grill plate and the base, which could cause the base to melt!

5. Use two m4x14 screws and stainless-steel  at washers to

screw clockwise the grill handle and cover.

6. Connect the power cord to a power supply. Make sure the

device is stable and properly assembled before operating it.

7. If there is no need to use the barbecue feet, just assemble the

grill plate to the grill holder and connect the power cord.

5. OPERATION

1. Connect the appliance to the mains electricity supply.

2. Set the temperature regulator to the required temperature level. There are 5

temperature settings, from 1 (low) to 5 (high).

3. The product reaches a maximum temperature of 215 +/- 25 ºC with the cover in place

and of 195 +/- 25 ºC without it.

Note: It usually takes about 3 minutes to preheat. Preheating is faster with the roasting hood

in place.

4. The temperature indicator light will turn off as soon as the

required temperature has been reached.

5. Place the food to be grilled on the grill plate.

6. To turn the device off, turn the temperature regulator to the

minimum position and then disconnect it form the power

supply.

INDOOR OR OUTDOOR USE

The barbecue can also be used indoors as a griddle.

• If the device is going to be used inside the house, make sure to place at a minimum

distance of 30 cm from walls and other objects.