Planet VRT-401G Инструкция по эксплуатации онлайн [32/86] 66166

Parameters Description

2.2.1 Dynamic IP address Your ISP will automatically give you an IP address

2.2.2 Static IP address Your ISP has given you an IP address already

2.2.3 PPPoE Your ISP requires PPPoE connection.

2.2.4 PPTP Your ISP requires you to use a Point-to-Point Tunneling

Protocol (PPTP) connection.

2.2.5 L2TP Your ISP requires L2TP connection.

2.2.6 Telstra Big Pond Your ISP requires Telstra Big Pond connection.

2.2.7 DNS You can specify a DNS server that you wish to use

2.2.8 DDNS You can specify a DDNS server that you wish to use and

configure the user name and password provided by you

DDNS service provider.

Once you have made a selection, click <More Configuration> at the bottom of the screen, and

proceed to the manual’s relevant sub-section

2.2.1 Dynamic IP

Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some

ISP’s may also require you to fill in additional information such as Host Name, Domain Name and

MAC address (see chapter 1 “Cable Modem” for more detail)

2.2.2 Static IP Address

Select Static IP address if your ISP has given you a specific IP address for you to use. Your ISP

should provide all the information required in this section. (See chapter 1 “Fixed IP” for more

detail)

2.2.3 PPPoE (PPP over Ethernet)

Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP

should provide all the information required in this section. (See chapter 1 “PPPoE” for more detail)

2.2.4 PPTP

Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP

should provide all the information required in this section. (See chapter 1 “PPTP” for more detail)