Planet VRT-401G Инструкция по эксплуатации онлайн [40/86] 66166

Parameters Default Description

Mode It allows you to set the AP to AP, Station, Bridge

or WDS mode.

Band It allows you to set the AP fix at 802.11b or

802.11g mode. You also can select B+G mode

to allow the AP select 802.11b and 802.11g

connection automatically.

ESSID default This is the name of the wireless LAN. All the

devices in the same wireless LAN should have

the same ESSID.

Channel Number 11 The channel used by the wireless LAN. All

devices in the same wireless LAN should use

the same channel.

Associated Clients Click “Show Active Clients” button, then an

“Active Wireless Client Table” will pop up. You

can see the status of all active wireless stations

that are connecting to the access point.

WLAN MAC This is the MAC address used by the Wireless

interface of this AP when it is in the station

modes.

Clone MAC Click the “Clone MAC” button will copy the MAC

address of your PC, that you are using to

configure the AP, to the WLAN MAC.

MAC address If you want to bridge more than one networks

together with wireless LAN, you have to set this

access point to “AP Bridge-Point to Point mode”,

“AP Bridge-Point to Multi-Point mode” or “AP

Bridge-WDS mode”. You have to enter the MAC

addresses of other access points that join the

bridging work.

Set Security Click the “Set Security” button, then a “WDS

Security Settings” will pop up. You can set the

security parameters used to bridge access

points together here when your AP is in AP

Bridge modes. You can refer to section 4.3

“Security Settings” for how to set the parameters.

Click <Apply> at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the router (with the advance settings in place)