Planet VRT-401G Инструкция по эксплуатации онлайн [42/86] 66166

Data Rate The “Data Rate” is the rate this access point uses to

transmit data packets. The access point will use the

highest possible selected transmission rate to transmit

the data packets.

Preamble Type The “Long Preamble” can provide better wireless LAN

compatibility while the “Short Preamble” can provide

better wireless LAN performance.

Broadcast ESSID If you enable “Broadcast ESSID”, every wireless station

located within the coverage of this access point can

discover this access point easily. If you are building a

public wireless network, enabling this feature is

recommended. Disabling “Broadcast ESSID” can provide

better security.

IAPP If you enable “IAPP”, it will allow wireless station roaming

between IAPP enabled access points within the same

wireless LAN.

802.11g Protection This is also called CTS Protection. It is recommended to

enable the protection mechanism. This mechanism can

decrease the rate of data collision between 802.11b and

802.11g wireless stations. When the protection mode is

enabled, the throughput of the AP will be a little lower due

to many of frame traffic should be transmitted.

Click <Apply> at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the router.

2.4.3 Security

This Access Point provides complete wireless LAN security functions, include WEP, IEEE

802.11x, IEEE 802.11x with WEP, WPA with pre-shared key and WPA with RADIUS. With these

security functions, you can prevent your wireless LAN from illegal access. Please make sure your

wireless stations use the same security function.

2.4.3.1 WEP only

When you select 64-bit or128-bit WEP key, you have to enter WEP keys to encrypt data. You can

generate the key by yourself and enter it. You can enter four WEP keys and select one of them

as default key. Then the router can receive any packets encrypted by one of the four keys