Grundig Ovation 3 CDS 8000 iP [11/35] Connection and preparatio

Grundig Ovation 3 CDS 8000 iP [11/35] Connection and preparatio
11
ENGLISH
Connecting external devices
Note:
7
Switch the hi-fi system off before you
connect external devices.
1 Use a standard audio cable to connect the
audio output of the external device to the
socket »AUX IN« on the back of the hi-fi
system.
Connecting the headphones
1 Insert the headphone plug (ø 3.5 mm) into
the »U« socket on the left side of the hi-fi
system.
The loudspeakers of the hi-fi system are
switched off.
Note:
7
Excessive sound pressure from the
earphones or headphones can cause
hearing loss.
CONNECTION AND PREPARATION
---------------------------------------
Inserting a memory card
The hi-fi system supports SD/SDHC and MMC
memory cards.
Note:
7
The hi-fi system must be switched off while
the memory card is being inserted. If it is
not switched off, data can be lost.
1 Switch off the hi-fi system by pressing »8«.
2 Insert the card carefully into the »SD« card
slot (on the left side) with gold contacts first
and facing to the backside, until it latches into
place.
Note:
7
Do not use excessive force when inserting
the memory card. Only apply slight
pressure.
7
The memory cards are resistant to dirt and
moisture, but may only be inserted into the
hi-fi system in a dry and clean condition.
7
Never remove memory cards during
operation. This can damage the memory
card. This type of damage will invalidate
your warranty.
Removing the memory card
Note:
7
The hi-fi system must be switched off while
the memory card is being removed. If it is
not switched off, data can be lost.
1 Switch off the hi-fi system by pressing »
8
«.
2 Remove the memory card from the card slot
by pressing the card inwards slightly until the
latch is released. Then pull out the card.

Содержание

Скачать