![Vitek VT-1356 [6/6] Русский](/img/pdf.png)
Vitek VT-1356 [6/6] Русский
![Vitek VT-1356 [6/6] Русский](/views2/1007253/page6/bg6.png)
7
• Use the comb regularly to check for uneven spots and to comb out loose hair.
STEP 5 THE FINISHING T
OUCH
• Finally, for a smooth, well/groomed style, remove the comb attachment and turn
around the clipper (with the underside up) so that you can work around the sides
and the part around the ears.
• Place the blade adjustment level in the position for the shortest length. Place the
clipper at a right angle against the head while the teeth of the blade lightly touch
the skin and work downward. This will give you as smooth a result as when you use
a razor.
CUTTING LONGER HAIR
• If the hair must be layered, first divide and comb the hair as usual. Then divide the
hair from the back into three equal parts around the head. Clip the upper layers
apart so that they are not in the way when you are cutting the lowest layer, then
cut with scissors or with a clipper combined with a hairdresser's comb.
CLEANING AND MAINTENANCE
• Always remove the plug from the electrical outlet.
• After each using remove any hair clipping with (he cleaning brush and spread one
or two drops of oil on the blades Use only acid/free oil (as supplied): sewing
machine oil can also be used.
• You can unscrew the cutting blades once in a while to remove all hair trimmings.
When replacing the blades, make sure that they are properly adjusted and don't
forget the spacers. The blades are adjusted as follow:
/ Screw the blades back on the clipper, but do not turn the screws tightly yet.
/ Turn the adjustment level on the side downward.
/ Shift the top blade until it is even (parallel) with the bottom blade, and be sure that
the two blades are about 1,2 mm apart.
/ Now tighten screws firmly and make sure that the blades cannot shift.
• You can clean the outside of the clipper with a clean, soft, damp cloth.
SPECIFICATION
Power requirement 230 V ~ 50 Hz
Max. power 15 W
SERVICE LIFE OF THE HAIR CUTTING SET NOT LESS THAN 3 YEARS
ENGLISH
6
1. Керамические лезвия
2. Переключатель "Вкл. / Выкл."
3. Регулятор положения лезвия
4. Стальные лезвия
5. Крепление шнура
РУССКИЙ
МАШИНКА ДЛЯ СТРИЖКИ ВОЛОС
Vt-1356.qxd 18.12.03 12:57 Page 12
Содержание
- Модель vt 1356 1
- Features 2
- Hair clipper 1 ceramic blade 2 on off switch 3 blade adjustment lever 4 steel blade 5 pivot cord 2
- Vt 1356 qxd 18 2 3 12 57 page 4 2
- Русский english 2
- Before using for the first time before using the appliance for the first time read the instructions and keep it for later reference when you use the clipper for the first time cut only small portions of hair until you are accustomed to the cutting length with a certain comb attachment first try the longest comb attachment 12 mm if you want a shorter cut use the comb 6 mm experience will soon tell you which comb attachment to use for the result you desired after the hair has been combed into its natural direction proceed as fol lows to achieve a smooth layered hairstyle 3
- English 3
- Important safeguard for safety reason this appliance may not be used within a distance of one meter from a bathtub or shower not from a sink filled with water never hold it under water if an appliance has fallen into water never try to grab it first pull the lug from the electrical outlet with children or the infirm use the appliance only under supervision treat the cutting blades with care do not bump them against hard objects or allow them to fall do not use if the blades are damaged do not use the appliance if it is damaged or the cord is damaged 3
- Includes accessories 3
- Vt 1356 qxd 18 2 3 12 57 page 6 3
- Русский 3
- Adjustment screw 4
- Adjustment screw is located on the side of the clippers if the clippers do not work perfectly turn this screw to the right until a rattling sound can be heard then turn the screw back to the left until this sound just stops note never turn the adjustment screw completely out 4
- Before you start cutting check the clippers make sure that they are free of hair and lint spread drop of oil on blades switch on the clipper and check it runs smoothly place a towel around the person s neck seat the person so their head is approximately at your eye level this allows ease of visibility while cutting and a relaxed control of the unit first comb the hair so that it falls in its natural direction hold the clipper as com fortably as possible in your hand 4
- Blades adjustment level 4
- Click the comb attachment onto the cutting blades first hook them on from the top and press on the bottom remove them by pulling up the lip on the bottom of the comb 4
- Comb attachment 4
- English 4
- Instruction for use first remove the guard from the cutting blades plug the clipper into electrical outlet switch on the clipper after using always switch off the clipper first and then pull out of the electrical socket replace the blade guard on the cutting blades if the clipper does not cut well the swing arm must be checked plug in the clipper and switch it on with a coin or large screwdriver turn the large plastic screw on the side clockwise until the clipper makes a clattering sound then turn the adjustment screw back until the clattering stops 4
- Move the adjustment level to change the cutting length up for a shorter length down for longer length 4
- Vt 1356 qxd 18 2 3 12 57 page 8 4
- Русский 4
- English 5
- Vt 1356 qxd 18 2 3 12 57 page 10 5
- Русский 5
- English 6
- Vt 1356 qxd 18 2 3 12 57 page 12 6
- Русский 6
Похожие устройства
- Xdevice microMAP-Indianapolis HIT-4-A5-FM Инструкция по эксплуатации
- Bosch MCM 2054 Инструкция по эксплуатации
- A4Tech G7-300 Инструкция по эксплуатации
- Philips SHS4700 ⁄ 00 Инструкция по эксплуатации
- Korg GT120 Инструкция по эксплуатации
- Интерскол СМ-60/150 Инструкция по эксплуатации
- Vitek VT-1355 Инструкция по эксплуатации
- Korg GT4 Инструкция по эксплуатации
- A4Tech G7-200 Инструкция по эксплуатации
- Globalsat GH-625M Инструкция по эксплуатации
- Bosch MCM 5514 Инструкция по эксплуатации
- Festool TS 55 EBQ-Plus-FS 561508 Инструкция по эксплуатации
- Vitek VT-1354 Инструкция по эксплуатации
- Korg LCA120 Инструкция по эксплуатации
- Globalsat GH-625B Инструкция по эксплуатации
- A4Tech G7-540 Инструкция по эксплуатации
- Bosch MCM 5525 Инструкция по эксплуатации
- Philips SHP8500 ⁄ 00 Инструкция по эксплуатации
- Festool TS 75 EBQ 561184 Инструкция по эксплуатации
- Vitek VT-1353 Инструкция по эксплуатации
Скачать
Случайные обсуждения