Home
Главная
Bort
Перфораторы
BHD-800N
Инструкция по эксплуатации Страница: 7

Bort BHD-800N [7/42] English

Rotary hammer

INTENDED USE

● This tool is intended for hammer drilling in concrete,

brick and stone; for drilling in wood, metal and plas-

tic as well as for screwdriving (speciﬁ c accessories

should be used)

● The hammering system in this tool outperforms any

traditional ratcheting drill when drilling in concrete

● This tool is designed for use in combination with all

standard SDS+ accessories

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/Off switch

2 Wheel for maximum speed control

3 Switch locking button

4 Switch for changing direction of rotation

5 Switch for selecting operating mode

6 Locking sleeve

7 Auxiliary handle

SAFETY

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, ﬁ re

and/or serious injury.

● Wear ear protectors with hammer drills (exposure to

noise can cause hearing loss)

● Use auxiliary handles supplied with the tool (loss of

control can cause personal injury)

● Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

● Always keep the cord away from moving parts of the

tool

● When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

● Use completely unrolled and safe extension cords

with a capacity of 16 Amps (UK 13 Amps)

● In case of electrical or mechanical malfunction, im-

mediately switch off the tool and disconnect the plug

● SBM Group can assure ﬂ awless functioning of the

tool only when original accessories are used

● Use only accessories with an allowable speed match-

ing at least the highest no-load speed of the tool

● This tool should not be used by people under the age

of 16 years

● Be careful not to drill or drive into areas where electri-

cal wires may be contacted

● If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect the

plug

● Never use tool when cord is damaged; have it re-

placed by a qualiﬁ ed person

● Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool

(tools with a rating of 230V or 240V can also be con-

nected to a 220V supply)

● If the drill bit becomes unexpectedly jammed (caus-

ing a sudden, dangerous reaction), immediately

switch off the tool

● Be aware of the forces that occur as a result of jam-

ming (especially when drilling metals); always hold

the tool ﬁ rmly with both hands and take a secure

stance

● Always disconnect plug from power source before

making any adjustment or changing any accessory

● Holding the tool

- keep the ventilation slots uncovered

- do not apply too much pressure on the tool; let the

tool do the work for you

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire is

required

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

Every six months it is recommended to take your ma-

chine to Service Center to change the grease.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group deal-

er. Here they will be disposed of in an environmentally

safe way.

English

Bort BHD-800N [7/42] English

Содержание

Похожие устройства