Home
Главная
Bort
Аккумуляторная Отвертка
BAS-36N-Li
Инструкция по эксплуатации Страница: 7

Bort BAS-36N-Li [7/40] English

Cordless screwdriver

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1. On/off switch

2. Ring for torque control

3. Knob for locking/adjusting handle

4. Switch for changing direction of rotation

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁ re

and/or serious injury.

• Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

• Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

• Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

• Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the charg-

er (chargers with a rating of 230V or 240V can also

be connected to a 220V supply)

• In case of electrical or mechanical malfunction, im-

mediately switch off the tool or unplug charger from

power source

• SBM Group can assure flawless functioning of the

tool only when original accessories are used

• Use only accessories with an allowable speed

matching at least the highest no-load speed of the

tool

• This tool should not be used by people under the age

of 16 years

• Be careful not to drill or drive into areas where elec-

trical wires may be contacted

• Do not touch the contacts in the charger

• Do not expose tool/charger/battery to rain

• Never charge battery outdoors

• Store tool/charger/battery in locations where tem-

perature will not exceed 40°C or drop below 0°C

• Batteries will explode in fire, so do not burn battery

for any reason

• When damaged, and under extreme usage and tem-

perature conditions, batteries may start to leak

- if liquid comes into contact with the skin, wash quick-

ly with soap and water, then with lemon juice or vin-

egar

- if liquid gets into the eyes, flush eyes with clean wa-

ter for a minimum of 10 minutes and seek immedi-

ately medical attention

• When battery is not in tool or charger, it should be

kept away from metal objects such as nails, screws,

keys etc. to prevent short-circuit

• Do not use charger when damaged; take it to one of

the officially registered SBM Group Service Stations

for a safety check

• Do not use battery when damaged; it should be re-

placed immediately

• Do not disassemble charger or battery

• Do not attempt to recharge non-rechargeable bat-

teries with the charger WHEN CONNECTING NEW

3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of the charger to the earth terminal of

the plug

• If for any reason the old plug is cut off the cord of the

charger, it must be disposed of safely and not left

unattended

To ensure longer service life and proper

performance of the battery, take the following

actions when you start using new battery:

1. Use the new battery, without recharging it, till its

complete discharge.

2. Then charge the battery for 5-7 hours.

3. Repeat abovementioned actions (1 and 2) 3-5 times

to reach the nominal battery capacity.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These

solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most

of the packaging materials can be recycled. Take

these materials to the appropriate recycling locations.

Take your unwanted machines to your local SBM

Group dealer. Here they will be disposed of in an

environmentally safe way.

NiCd batteries can be recycled. Deliver them to a disposal

site for chemical waste so that they can be recycled or

disposed of in an environmentally friendly manner.

English

Bort BAS-36N-Li [7/40] English

Содержание

Похожие устройства