![Icom IC-91AD [11/131] Panel description](/img/pdf.png)
Icom IC-91AD [11/131] Panel description
![Icom IC-91A [11/131] Panel description](/views2/1074080/page11/bgb.png)
5
2
PANEL DESCRIPTION
2
KEY Pushed momentarily Pushed and held for 1 sec.
• Inputs digit ‘7’ for frequency input, memory channel selection,
etc.
• While pushing [PTT], this key sends the DTMF code “7.”
• Inputs digit ‘8’ for frequency input, memory channel selection,
etc.
• While pushing [PTT], this key sends the DTMF code “8.”
• Inputs digit ‘9’ for frequency input, memory channel selection,
etc.
• While pushing [PTT], this key sends the DTMF code “9.”
• Inputs digit ‘0’ for frequency input, memory channel selection,
etc.
• While pushing [PTT], this key sends the DTMF code “0.”
• Inputs MHz digit for frequency input.
• While pushing [PTT], this key sends the DTMF code “F (#).”
• During DV mode operation, selects the record track for voice
memory. (p. 62)
• While pushing [PTT], this key sends the DTMF code “E (✱).”
• During FM/FM-N mode operation, selects repeater tone, tone
squelch, DTCS squelch and no tone operation in sequence.
(p. 110)
• During DV mode operation, selects digital call sign, digital code
and no tone operation in sequence. (p. 110)
• Selects tuning step selection. (p. 18)
• During FM/FM-N mode operation, starts tone scan function.
(p. 112)
• During DV mode operation, selects break-in operation mode.
(p. 51)
• During DV mode operation, set “CQCQCQ” for station’s call sign
for operation.
• Select DTMF memory mode. (p. 103)
• During DV mode operation, to turn EMR mode operation ON,
keep pushing and holding until 3 short and 1 long beeps are
emitted. (p. 56)
• Selects the operating mode.
Содержание
- Instruction manual 1
- Vhf uhf digital transceiver 1
- Vhf uhf fm transceiver 1
- Dv mode digital voice low speed data communication operation is ready gps receiver connection text message and call sign exchange 2
- Explicit definitions 2
- Features 2
- Foreword 2
- Important 2
- Read all instruction 2
- Save this instruction manual 2
- Simple band scope dualwatch operation optional pc remote control 2
- Be careful 3
- Do not 3
- Precautions 3
- R warning 3
- R warning neve 3
- R warning rf exposure 3
- Table of contents 4
- Supplied accessories 6
- The following accessories are supplied with the transceiver q hand strap 1 w antenna 1 e battery pack 1 r battery charger 1 t belt clip 6
- Accessory attachment 7
- I antenna 7
- I battery pack 7
- I belt clip 7
- I handstrap 7
- I front top and side panels 8
- Panel description 8
- Panel description 9
- D keypad 10
- Key pushed momentarily pushed and held for 1 sec 10
- Panel description 10
- Key pushed momentarily pushed and held for 1 sec 11
- Panel description 11
- I function display 12
- Low att 12
- Memoname 12
- Panel description 12
- Prio emr dsql dv 12
- Prio prio 12
- Panel description 13
- Battery charging 14
- D battery caution 14
- I caution 14
- Battery charging 15
- D charging caution 15
- Battery charging 16
- Be sure to turn the transceiver power off 16
- D battery indicators 16
- D charging note 16
- External dc power operation becomes possible when using an optional cp 12l cp 19r or opc 254l the attached battery pack is also charged simultaneously except during transmit see p 11 for more details the external dc power supply voltage must be within 10 16 v to charge the battery pack and operation when using an optional opc 254l 16
- I regular charging 16
- Prior to using the transceiver for the first time the battery pack must be fully charged for optimum life and operation 16
- The indicators show and in sequence while charging and both indicators disappear when com pletely charged 16
- Battery charging 17
- D charging note 17
- I rapid charging 17
- Battery charging 18
- D battery indicator 18
- D battery information 18
- D battery life 18
- D battery replacement 18
- I battery information 18
- I optional battery case 18
- Battery charging 19
- D operating note 19
- I external dc power operation 19
- Frequency and channel setting 20
- I main band selection 20
- Memoname 20
- I mode selection 21
- Channels 22
- D call tv weathe 22
- Frequency and channel setting 22
- I operating band selection 22
- 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 23
- Frequency and channel setting 23
- D tuning step selection 24
- D using the dial 24
- Frequency and channel setting 24
- I setting a frequency 24
- I setting a tuning step 24
- 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 25
- D using the keypad 25
- Frequency and channel setting 25
- Basic operation 26
- I receiving 26
- I setting audio volume 26
- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 27
- I operating mode selection 27
- I setting squelch level 27
- Basic operation 28
- I attenuator function 28
- I monitor function 28
- I band scope 29
- Basic operation 30
- I transmit power selection 30
- I transmitting 30
- Appears 31
- Appears while the lock function is activated the squelch control and volume control can be used while the lock function is in use with default setting either or both the squelch control and volume control can also be locked in set mode p 90 31
- Available frequency bands and operating mode are different depending on bands 31
- Dtcs dtcs 31
- I dualwatch operation 31
- I lock function 31
- While in dualwatch operation the display indicates a band in the upper half and b band in the lower half 31
- Basic operation 32
- D main band selection 32
- D setting audio volume 32
- Vol vol 32
- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 33
- Basic operation 33
- D setting squelch level 33
- D volume setting for dualwatch 33
- Basic operation 34
- D automatic tv channel programming 34
- D skip channel setting 34
- D tv channel receiving 34
- I tv channel operation 34
- I repeater operation 35
- Repeater and duplex operations 35
- D checking the repeater input signal 36
- D off band indication 36
- Repeater and duplex operations 36
- 2 3 4 5 37
- 7 8 9 10 11 12 13 14 15 16 17 18 19 37
- D setting duplex direction 37
- D setting offset frequency 37
- I duplex operation 37
- Repeater and duplex operations 37
- D frequency range and offset direction 38
- I auto repeater function 38
- Repeater and duplex operations 38
- 2 3 4 5 39
- 7 8 9 10 11 12 13 14 15 16 17 18 19 39
- I 1750 hz tone 39
- Repeater and duplex operations 39
- Dv mode operation 40
- I call sign programming 40
- I digital mode operation 40
- Optional ut 121 is required for ic 91a 40
- 0 push ï 5 to store the programmed call sign with note and returns to my call sign screen 1 push menu lock to return to frequency indication 41
- 2 3 4 5 6 41
- 9 10 11 12 13 14 15 16 17 18 19 41
- Dv mode operation optional ut 121 is required for ic 91a 41
- I push 6 several times to set the cursor beside indi cation o repeat steps t to y to program the desired 4 character note 41
- To se lect the desired character or code 41
- U repeat the steps t and y to enter your own call sign 41
- Y push 6 to select 2nd digit then rotate dial 41
- Cqcqcq cqcqcq 42
- D station call sign programming 42
- Dv mode operation optional ut 121 is required for ic 91a 42
- E rotate dial 42
- I push ï 5 to store the programmed call sign and returns to your call sign screen o push menu lock to return to frequency indication 42
- Q select b band as the main band 42
- Station call sign must be programmed for the specified sta tion call as well as repeater operation in both digital voice and low speed data communications 42
- Station1 station1 42
- T rotate dial 42
- To se lect the desired character or code 42
- To select the desired call sign memory u01 to u60 r push 6 to enter call sign programming mode 42
- To select the desired character or code 42
- U repeat the steps t and y to enter the desired station call sign 42
- U01 u01 42
- W enter ur in call sign set mode 42
- Y push 6 to select 2nd digit then rotate dial 42
- 2 3 4 5 6 43
- 9 10 11 12 13 14 15 16 17 18 19 43
- Dv mode operation optional ut 121 is required for ic 91a 43
- Dv mode operation optional ut 121 is required for ic 91a 44
- I digital voice mode operation 44
- 2 3 4 5 6 45
- 9 10 11 12 13 14 15 16 17 18 19 45
- D when calling the desired station 45
- D when sending a cq 45
- Dv mode operation optional ut 121 is required for ic 91a 45
- Dv mode operation optional ut 121 is required for ic 91a 46
- I about d star system 46
- 2 3 4 5 6 47
- 9 10 11 12 13 14 15 16 17 18 19 47
- D repeater call sign programming 47
- Dv mode operation optional ut 121 is required for ic 91a 47
- I digital repeater operation 47
- D repeater operation in the same zone 48
- Dv mode operation optional ut 121 is required for ic 91a 48
- 2 3 4 5 6 49
- 9 10 11 12 13 14 15 16 17 18 19 49
- Dv mode operation optional ut 121 is required for ic 91a 49
- Setting example 1 49
- D repeater operation into another zone 50
- Dv mode operation optional ut 121 is required for ic 91a 50
- 2 3 4 5 6 51
- 9 10 11 12 13 14 15 16 17 18 19 51
- Dv mode operation optional ut 121 is required for ic 91a 51
- Setting example 2 51
- D desired call record indication 52
- Dv mode operation optional ut 121 is required for ic 91a 52
- For your information when receiving a call the received station call sign is auto matically displayed and scrolled in sequence at the bottom line of the function display 52
- I received call sign 52
- If you want to receive a call sign correctly even in stand by condition 52
- Note when a call is received in dv mode when the power save function is activated the call sign may not be received correctly this is normal not a malfunction because of header of the call sign cannot be detected during power save turn the power save function off 52
- Q enter rx call sign set mode 52
- R push menu lock to return to frequency indication 52
- This can be turned off in display set mode 52
- To select the desired record channel e to confirm the received call push ï 5 several times to select the desired call sign from caller called rxrpt1 and rxrpt2 52
- W rotate dial 52
- When a call is received in dv mode the calling station and the repeater call signs being used can be stored into the re ceived call record the stored call signs are viewable in the following manner up to 20 calls can be recorded 52
- 2 3 4 5 6 53
- 9 10 11 12 13 14 15 16 17 18 19 53
- D one touch reply using the call record 53
- Dv mode operation optional ut 121 is required for ic 91a 53
- D copying the call sign memory contents 54
- Dv mode operation optional ut 121 is required for ic 91a 54
- I copying the call sign 54
- When auto is set to edit record item 54
- 2 3 4 5 6 55
- 9 10 11 12 13 14 15 16 17 18 19 55
- Dv mode operation optional ut 121 is required for ic 91a 55
- When select is set to edit record item 55
- D copying the call record contents into call sign memory 56
- Dv mode operation optional ut 121 is required for ic 91a 56
- When all is selected 56
- When caller rxrpt1 or rxrpt2 is selected 56
- 2 3 4 5 6 57
- 9 10 11 12 13 14 15 16 17 18 19 57
- I break in communication 57
- D tx message programming 58
- Dv mode operation optional ut 121 is required for ic 91a 58
- I message operation 58
- 2 3 4 5 6 59
- 9 10 11 12 13 14 15 16 17 18 19 59
- D message transmission 59
- Dv mode operation optional ut 121 is required for ic 91a 59
- D automatic reply function setting 60
- D rx message indication 60
- Dv mode operation optional ut 121 is required for ic 91a 60
- I automatic reply function 60
- 2 3 4 5 6 61
- 9 10 11 12 13 14 15 16 17 18 19 61
- D play back or erase the voice memory 61
- D voice memory recording for automatic reply 61
- Dv mode operation optional ut 121 is required for ic 91a 61
- I emr communication 62
- Low speed data communication 62
- 2 3 4 5 6 63
- 9 10 11 12 13 14 15 16 17 18 19 63
- D low speed data communication application setting 63
- D low speed data communication operation 63
- D transmission condition setting 63
- Dv mode operation optional ut 121 is required for ic 91a 63
- D sentence formatter setting 64
- Dv mode operation optional ut 121 is required for ic 91a 64
- I gps operation 64
- 2 3 4 5 6 65
- 9 10 11 12 13 14 15 16 17 18 19 65
- D gps message programming 65
- Dv mode operation optional ut 121 is required for ic 91a 65
- E rotate dial 65
- Q enter gps in message position set mode 65
- R push 6 to select 2nd digit then rotate dial 65
- T repeat the steps r and t to enter the desired message 65
- To select the desired character or code 65
- To select the desired character or symbol 65
- W push 6 to select the message edit condition 65
- Y push ï 5 to store the message u push menu lock to return to frequency indication 65
- 5 78 e 123 5 78 e 66
- 89 n 34 6 89 n 66
- D gps message automatic transmission 66
- D position indication 66
- Dv mode operation optional ut 121 is required for ic 91a 66
- E push ï 5 66
- Min 1min 66
- My position 66
- Note your own call sign my should be set to activate the gps automatic transmission 66
- Q enter gps auto tx in dv set mode 66
- Q enter position in message position set mode 66
- Sec 10sec 66
- Sec 30sec 66
- Sec 5sec 66
- To return to dv set mode screen r push menu lock to return to frequency indication 66
- To return to message position screen r push menu lock to return to frequency indication 66
- To select the desired position data transmit ting interval from 5 sec 10 sec 30 sec 1 min 3 min 5 min 10 min 30 min and off 66
- To select the received position data indica tion e push ï 5 66
- W rotate dial 66
- 2 3 4 5 6 67
- 8 9 10 11 12 13 14 15 16 17 18 19 67
- D received gps message indication 67
- Dv mode operation optional ut 121 is required for ic 91a 67
- Q enter rx gps in message position set mode 67
- To return to message position screen e push menu lock to return to frequency indication 67
- W push ï 5 67
- D dv voice memory 68
- Dv mode operation optional ut 121 is required for ic 91a 68
- I other functions for dv mode operation 68
- 2 3 4 5 6 69
- 8 9 10 11 12 13 14 15 16 17 18 19 69
- D dv automatic detect 69
- Dv mode operation optional ut 121 is required for ic 91a 69
- N playing back and erasing the recorded audio 69
- I general description 70
- I selecting a memory channel 70
- Memory call channels 70
- 2 3 4 5 6 7 71
- 9 10 11 12 13 14 15 16 17 18 19 71
- I selecting a call channel 71
- Memory channel programming 72
- 2 3 4 5 6 7 73
- 9 10 11 12 13 14 15 16 17 18 19 73
- I memory bank setting 73
- Memory call channels 73
- I memory bank selection 74
- Memory call channels 74
- 2 3 4 5 6 7 75
- 9 10 11 12 13 14 15 16 17 18 19 75
- D available characters 75
- I programming memory bank scan name 75
- Memory call channels 75
- I selecting memory bank name indication 76
- Memory call channels 76
- 2 3 4 5 6 7 77
- 9 10 11 12 13 14 15 16 17 18 19 77
- I copying memory call contents 77
- I memory clearing 78
- Memory call channels 78
- I erasing transferring bank contents 79
- All selected bank scan 80
- Frequency memory skip function 80
- Full scan 80
- I scan types 80
- Memory skip scan 80
- Programmed scan 80
- Scan operation 80
- Selected band scan 80
- 10 11 12 13 14 15 16 17 18 19 81
- 2 3 4 5 6 7 8 81
- I full band programmed scan 81
- I scan edges programming 82
- Scan operation 82
- 10 11 12 13 14 15 16 17 18 19 83
- 2 3 4 5 6 7 8 83
- I memory scan 83
- I memory bank scan 84
- Scan operation 84
- 10 11 12 13 14 15 16 17 18 19 85
- 2 3 4 5 6 7 8 85
- I skip channel frequency setting 85
- Scan operation 86
- 10 11 12 13 14 15 16 17 18 19 87
- 2 3 4 5 6 7 8 87
- I scan resume condition 87
- Scan operation 87
- D about priority beep function 88
- I priority watch types 88
- Memory call channel watch 88
- Memory scan watch 88
- Priority watch 88
- Vfo scan watch 88
- 11 12 13 14 15 16 17 18 19 89
- 2 3 4 5 6 7 8 9 89
- I priority watch operation 89
- D vfo scan watch 90
- Priority watch 90
- 12 13 14 15 16 17 18 19 91
- 2 3 4 5 6 7 8 9 10 91
- I general 91
- Menu screen operation 91
- D set mode 92
- I items list 92
- I menu list 92
- I menu screen indication for b band 92
- Menu screen operation 92
- While b band is selected menu screen shows following in dication 92
- 12 13 14 15 16 17 18 19 93
- 2 3 4 5 6 7 8 9 10 93
- D display set mode 93
- D dup tone set mode 93
- D dv set mode 93
- D scan set mode 93
- D sounds set mode 93
- Menu screen operation 93
- Can be specified the specified time period is retained even when the transceiver is turned off by the auto power off function to cancel the function select off in this item 94
- D attenuator 94
- D auto power off 94
- D power save 94
- I set mode items 94
- Menu screen operation 94
- Min 60 min 90 min 120 min and off 94
- Ratio when no signal is received for 5 sec the ratio becomes 1 4 94
- Select the attenuator function on and off 94
- The attenuator prevents distortion of a desired signal by very strong rf signals near the desired frequency or when very strong electric fields such as from a broadcasting station are present at your location 94
- The power save func tion is activated in a 1 1 94
- The power save function reduces the current drain to con serve battery power this power save function can be turned off if desired by turning power on and off in the default setting 94
- The transceiver can be set to automatically turn off after a specified time period with a beep when no key operations are performed 94
- When no signal is received for another 60 sec then the ratio becomes 1 8 94
- When no signal is received for another more 60 sec 94
- 12 13 14 15 16 17 18 19 95
- 2 3 4 5 6 7 8 9 10 95
- D auto repeater 95
- D dial speed acceleration 95
- D monitor key action 95
- Menu screen operation 95
- D auto power on 96
- D key lock type 96
- D microphone simple mode 96
- D weather alert function 96
- Menu screen operation 96
- 12 13 14 15 16 17 18 19 97
- 2 3 4 5 6 7 8 9 10 97
- Allows continuous frequency selection of the operating fre quency across all bands single a single operating frequency can be se lected within the current band push band for band selection in this case all the operating frequency can be selected continuously default 97
- D active band 97
- D busy lockout 97
- D ptt lock 97
- D time out timer 97
- Menu screen operation 97
- To prevent accidental prolonged transmission etc the trans ceiver has a time out timer this function cuts a transmission off after 1 3 5 or 10 min of continuous transmission this timer can be cancelled off the time out timer is turned off default 1 to 10 min the transmission is cut off after the set period elapses 97
- Turns the busy lockout function on and off this function inhibits transmission while receiving a signal or when the squelch is open default off 97
- Turns the ptt lock function on and off transmission with ptt is inhibited when on is selected to prevent accidental transmission etc default off 97
- D auto reply 98
- D digital code 98
- D dv data tx 98
- I dv set mode items 98
- Menu screen operation 98
- 12 13 14 15 16 17 18 19 99
- 2 3 4 5 6 7 8 9 10 99
- D digital monitor 99
- D digital repeater setting 99
- D repeater call sign auto write 99
- D rx call sign auto write 99
- Digital monitors in dv mode analog monitors in fm mode 99
- Menu screen operation 99
- Sets the desired monitoring mode during digital mode opera tion from auto digital and analog auto the transceiver sets monitoring mode to fm and dv according to the received signal 99
- The transceiver sets the received repeater call sign for op eration therefore when a different call sign is set for op eration the previously set repeater call sign will be lost 99
- When accessing a digital repeater with a call sign different than is programmed the repeater call sign can be stored into rpt1 and or rpt2 automatically by reading the repeater s transmission the stored repeater s call sign can be re called when selecting the repeater call sign default on 99
- When accessing a repeater with a call sign different than is programmed the repeater call sign can be set into rpt1 and or rpt2 automatically by reading the repeater s trans mission default off 99
- When an individual station call is received the calling station call sign can be automatically set in ur default off 99
- D gps mode 100
- Menu screen operation 100
- Sentence formatter setting 100
- 12 13 14 15 16 17 18 19 101
- 2 3 4 5 6 7 8 9 10 101
- D call sign edit record 101
- D dv auto detect 101
- D gps auto tx timer 101
- Menu screen operation 101
- On the transceiver automatically selects fm mode for temporary operation 101
- Selects the call sign programming when the call sign is edited or corrected with the pre programmed call sign off the edited or corrected call sign is over writ ten select the edited or corrected call sign is pro grammed into the selected call sign memory auto the edited or corrected call sign is pro grammed into a blank channel automatically 101
- Selects the desired interval for automatic position transmis sion function from 5 10 30 second 1 3 5 10 and 30 min utes 101
- When a signal other than dv mode is received during dv mode operation the transceiver has capability of automatic fm mode selection off operating mode is fixed in dv 101
- Activates priority watch or priority watch with alert 102
- D priority watch 102
- D scan pause timer 102
- D scan resume timer 102
- Hold scan pauses on a received signal until it dis appears rotate dial to resume manually 102
- Hold scan pauses on the received signal even if it disappears rotate dial 102
- I scan set mode items 102
- Menu screen operation 102
- Off the priority watch is turned off 102
- On the transceiver checks the memory channel fre quency every 5 sec bell the transceiver checks the memory channel fre quency every 5 sec you can be alerted with beeps and blinking s 102
- Otherwise this timer does not activate 102
- Scan resume timer must be set shorter than scan pause timer 102
- Selects the scan pause time when receiving signals the scan pauses according to the scan pause time 2 20 sec scan pauses for 2 20 sec on a received signal in 2 sec steps 102
- Selects the scan resume time from a paused frequency after the received signal disappears 0 scan resumes when a received signal disap pears 1 5 sec scan pauses 1 5 sec after a received signal disappears 102
- To resume manu ally 102
- 12 13 14 15 16 17 18 19 103
- 2 3 4 5 6 7 8 9 10 103
- D memory bank link function 103
- D offset frequency 103
- D repeater tone frequency 103
- I dup tone set mode items 103
- Menu screen operation 103
- Available dtcs codes 104
- Available subaudible tone frequencies 104
- Code for dtcs squelch operation total of 104 codes 023 754 are available 104
- D dtcs code 104
- D tsql frequency 104
- Menu screen operation 104
- Selects dtcs 104
- Selects tone frequency for tone squelch or pocket beep oper ation from one of 50 available frequencies 104
- The transceiver has 50 tone frequencies and consequently their spacing is narrow compared with units having 38 tones therefore some tone frequencies may receive in terference from adjacent tone frequencies 104
- 12 13 14 15 16 17 18 19 105
- 2 3 4 5 6 7 8 9 10 105
- D busy led 105
- D display backlighting 105
- D dtcs polarity 105
- D dtmf speed 105
- I display set mode items 105
- Menu screen operation 105
- D lcd contrast 106
- D rx call sign display 106
- D rx message display 106
- D tx call sign display 106
- Menu screen operation 106
- Selects call sign display function from your my and off when this setting is set to your or my the transceiver auto matically indicates the set station or your own call sign at dig ital mode transmission 106
- Sets auto received message display function auto and off when this setting is set to auto the transceiver automati cally indicates and scrolls the received message 106
- The contrast of the lcd can be selected from 16 levels 1 106
- When a call is received the calling station call sign can be in dicated automatically 106
- 12 13 14 15 16 17 18 19 107
- 2 3 4 5 6 7 8 9 10 107
- D font size 107
- D opening call sign 107
- D opening logo 107
- D scan name 107
- Displayed character size during menu mode indication in the function display is selectable from large and small large makes 5 lines 107
- Menu screen operation 107
- Off opening logo indication is skipped 107
- Off the programmed scan or bank name is not dis played 107
- Small makes 6 lines 107
- That is displayed at power on can be skipped if desired on opening logo is displayed at power on 107
- The opening logo indication 107
- The programmed scan or bank name is displayed during the scan type selection on the programmed scan or bank name is dis played 107
- The set your own call sign programmed in my call sign can be displayed at power on 107
- Adjusts the key touch beep tone level to the desired level within 39 levels 108
- D beep output level 108
- D key touch beep 108
- D scan stop beep 108
- D scope audio output 108
- D standby beep 108
- D volume select 108
- I sounds set mode items 108
- Menu screen operation 108
- Must be set to on to have a beep tone 108
- Off no audio sounds during sweep 108
- Select the audio output function capability during sweep with band scope function on the received audio sounds during sweep 108
- Select the volume level adjustment from both and separate for dualwatch operation both both a band and b band volume level is ad justed with vol at the same time 108
- Separate the volume setting is adjusted indepen dently in a and b bands with vol 108
- The key touch beep 108
- Turns the key touch beep on or off 108
- Turns the scan stop beep function on or off 108
- 13 14 15 16 17 18 19 109
- 2 3 4 5 6 7 8 9 10 109
- I programming a dtmf code 109
- Other functions 109
- I transmitting a dtmf code 110
- 13 14 15 16 17 18 19 111
- 2 3 4 5 6 7 8 9 10 11 111
- I clearing a dtmf memory 111
- I confirming a dtmf memory 111
- Other functions 111
- D pocket beep 112
- D subaudible repeater tone 112
- D tone and dtcs squelches 112
- E push ï 5 112
- I setting dtmf transfer speed 112
- I tone frequency and dtcs code 112
- Other functions 112
- Q enter dtmf speed in dup tone set mode 112
- Some repeaters require subaudible tones to be accessed subaudible tones are superimposed over your normal signal and must be set in advance 112
- The dtmf transfer speed can be selected 112
- The tone squelch ctcss or dtcs squelch opens only when receiving a signal containing a matching subaudible tone or dtcs code respectively you can silently wait for calls from group members using the same tone or code sep arate tone frequencies can be set for repeater and tone squelch pocket beep operation 112
- These functions use subaudible tones or dtcs codes for calling and can be used as a common pager to inform you that someone has called while you were away from the trans ceiver 112
- To return to dup tone set mode and push menu lock to return to frequency indication 112
- To select dtmf transfer speed as below 100 transfer the dtmf data per about 100 msec 200 transfer the dtmf data per about 200 msec 300 transfer the dtmf data per about 300 msec 500 transfer the dtmf data per about 500 msec 112
- W rotate dial 112
- 13 14 15 16 17 18 19 113
- 2 3 4 5 6 7 8 9 10 11 113
- D setting dtcs code for dtcs squelch or beep 113
- Other functions 113
- Setting subaudible tones for repeater or tone squelch 113
- D setting the your and my call signs for digital call sign squelch or beep 114
- For digital code squelch or beep 114
- I digital code and digital call sign setting 114
- Other functions 114
- Setting digital code 114
- 13 14 15 16 17 18 19 115
- 2 3 4 5 6 7 8 9 10 11 115
- Other functions 115
- I digital code digital call sign squelch 116
- I tone dtcs squelch 116
- Other functions 116
- 13 14 15 16 17 18 19 117
- 2 3 4 5 6 7 8 9 10 11 117
- I dtcs polarity setting 117
- I pocket beep function 117
- Memoname 117
- Memoname memoname 117
- Other functions 117
- I tone scan 118
- Other functions 118
- 13 14 15 16 17 18 19 119
- 2 3 4 5 6 7 8 9 10 11 119
- I beep tones 119
- I dial speed acceleration 119
- I key lock effect 119
- D weather alert function 120
- D weather channel selection 120
- I weather channel operation 120
- Other functions 120
- 13 14 15 16 17 18 19 121
- 2 3 4 5 6 7 8 9 10 11 121
- I power save 121
- Approx 10 sec before the time out timer is activated the transceiver emits a beep tone as a warning 122
- I auto power off 122
- I auto power on 122
- I ptt lock 122
- I time out timer 122
- Min 90 min 60 min 30 min and off can be speci fied the specified period is retained even when the trans ceiver is turned off by the auto power off function to cancel the function select off in the auto power off item in set mode 122
- Other functions 122
- The transceiver can be set to automatically turn off after a specified period with a beep when no switch is pushed 122
- The transceiver can be set to automatically turn on after a specified period the timer can be selected within 30 min to 24 hrs in 30 min steps 122
- This can be selected with ap off in set mode 122
- This can be selected with ap on in set mode 122
- This can be selected with ptt lock in set mode 122
- This can be selected with tot in set mode 122
- To prevent accidental prolonged transmission etc the trans ceiver has a time out timer this timer cuts a transmission off after 1 3 5 or 10 min of continuous transmission this timer can be cancelled default 122
- To prevent accidental transmission etc the transceiver has a ptt lock function 122
- When operating with battery pack or case and the battery is exhausted auto power on does not function a slight current still flows in the circuits during standby con dition of the auto power on function 122
- 13 14 15 16 17 18 19 123
- 2 3 4 5 6 7 8 9 10 11 123
- I cloning function 123
- I mic sp jacks 123
- Other functions 123
- All reset 124
- Caution 124
- D all reset 124
- D partial reset 124
- I resetting 124
- Other functions 124
- Partial reset 124
- 14 15 16 17 18 19 125
- 2 3 4 5 6 7 8 9 10 11 125
- Possible cause 125
- Problem 125
- Solution 125
- Troubleshooting 125
- D general 126
- D transmitter 126
- Specifications 126
- 15 16 17 18 19 127
- 2 3 4 5 6 7 8 9 10 11 12 13 127
- D receiver 127
- Specifications 127
- Options 128
- 16 17 18 19 129
- 2 3 4 5 6 7 8 9 10 11 12 13 14 129
- I optional ut 121 installation 129
- Options 129
- I optional hm 75 130
- Options 130
- Remote control microphone 130
- 1 32 kamiminami hirano ku osaka 547 0003 japan 131
Похожие устройства
- Zota MK 3 Инструкция по эксплуатации
- Sony SVE-14A1X1RH Grey Инструкция по эксплуатации
- Icom IC-92AD Инструкция по эксплуатации
- Zota MK 4.5 Инструкция по эксплуатации
- Sony SVS-1311M9RB Black Инструкция по эксплуатации
- Icom IC-T70A Инструкция по эксплуатации
- Zota MK 6 Инструкция по эксплуатации
- Sony SVS-13A1V8RS Silver Инструкция по эксплуатации
- Icom IC-T70E Инструкция по эксплуатации
- Zota MK 7.5 Инструкция по эксплуатации
- Lenovo IdeaPad B570e 59328742 Инструкция по эксплуатации
- Icom IC-V80 Инструкция по эксплуатации
- Zota MK 9 Инструкция по эксплуатации
- Asus X54C-SX399O B815 Инструкция по эксплуатации
- Icom IC-V80E Инструкция по эксплуатации
- Zota MK 12 Инструкция по эксплуатации
- Asus K53E B960 2G 320G Инструкция по эксплуатации
- Icom IC-V80 Sport Инструкция по эксплуатации
- Zota MK 15 Инструкция по эксплуатации
- Lenovo IdeaPad V570c 59319588 Инструкция по эксплуатации