![Icom IC-V80 [57/64] Trouble shooting](/img/pdf.png)
Icom IC-V80 [57/64] Trouble shooting
![Icom IC-V80E [57/64] Trouble shooting](/views2/1074095/page57/bg39.png)
50
12
13
13
TROUBLE SHOOTING
If your transceiver seems to be malfunctioning, please check the following points before sending it to a service center.
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The transceiver does not turn
ON.
• The battery is exhausted.
• The battery polarity is reversed.
• Loose connection of a battery pack/case.
• Charge the battery pack, or replace the batteries.
• Check the battery polarity.
• Clean battery terminals.
pp. 11–13
p. 13
p. 13
No sound comes from the
speaker.
• Volume is too low.
• An external speaker or a cloning cable is
connected to the [SP] jack.
• Rotate [VOL] to adjust to a desired level.
• Check the external speaker connection or remove
the cloning cable.
p. 14
–
Transmitting is impossible. • The battery is exhausted.
• TX permission is inhibited.
• Charge the battery pack, or replace the batteries.
•
Set the TX permission setting to “ON” in the Set mode.
pp. 11–13
p. 41
Transmitting using the VOX
function is impossible.
• The VOX gain is set to OFF or too low.
• The microphone gain is too low.
•
Set the VOX gain to a suitable level.
•
Set the microphone gain to a suitable level.
pp. 41, 53
p. 41
Contacting with another sta-
tion is impossible.
• A different tone or code is used for the
tone/DTCS squelch.
• Check the tone/DTCS by performing a tone scan. p. 34
Frequency cannot be set. • The key lock function is activated.
• The memory mode, Call channel mode, or
weather channel mode is selected.
• Push [FUNC](M), then push and hold [ ]
(# ENT) for 1 sec. to cancel the key lock function.
• Push [VFO/MR/CALL] several times to select the
VFO mode.
p. 18
p. 15
A programmed scan does not
start.
• The memory mode, Call channel mode, or
weather channel mode is selected.
• The same frequency has been programmed
in the scan edge channels, “XA”–“Xb.”
• Push [VFO/MR/CALL] several times to select the
VFO mode.
• Program different frequencies in the scan edge
channels.
p. 15
p. 25
A me mor y s ca n does no t
start.
• The VFO mode or Call channel mode is
selected.
• Only one or no memory channel has been
programmed.
• Push [VFO/MR/CALL] several times to select the
memory mode.
• Program 2 or more memory channels.
p. 15
p. 25
The displayed frequency is er-
roneous.
• The CPU has malfunctioned.
• External factors have caused a fault.
• Reset the transceiver.
• Remove and re-attach the battery pack/case.
p. 49
p. 2
1
2
3
4
5
6
7
8
9
10
11
14
15
16
17
18
19
Содержание
- Instruction manual 1
- Iv80 iv8 1
- Vhf transceiver 1
- Built in vox circuit enabling the vox op 2
- Dust protection splash resistant construc 2
- Eration voice operated transmission 2
- Explicit definitions 2
- Features 2
- Foreword 2
- Important 2
- Read all instruction 2
- Save this instruction manual 2
- Tion ip54 2
- Be careful 3
- Do not 3
- Precautions 3
- R warning neve 3
- R warning rf exposure 3
- Fcc information 4
- For class b unintentional radiators 4
- Precautions 4
- Supplied accessories 5
- Accessories 2 6
- Basic operation 4 19 6
- Battery charging 13 6
- Memory call operation 4 28 6
- Panel description 7 6
- Repeater and duplex operation 0 23 6
- Table of contents 6
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 7
- Ce 5 56 7
- Cloning 8 7
- Dtmf memory 5 37 7
- Options 1 53 7
- Resetting 9 7
- Scan operation 9 31 7
- Set modes 8 47 7
- Specifications 4 7
- Table of contents 7
- Tone squelch and pocket beep 2 34 7
- Trouble shooting trouble shooting 0 7
- Accessories 8
- Antenna 8
- Belt clip 8
- 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 9
- Accessories 9
- Battery pack case 9
- Jack cover 9
- Front top and side panels 10
- Panel description 10
- 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 11
- D keypad 11
- Panel description 11
- Panel description 12
- 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 13
- Function display 13
- Panel description 13
- Panel description 14
- 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 15
- Battery charging 15
- Cautio 15
- Battery charging 16
- Cautio 16
- D battery caution 16
- For the bp 265 li ion battery 16
- 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 17
- Battery charging 17
- D charging caution 17
- Battery chargers 18
- Battery charging 18
- Using the bc 191 to rapid charge the bp 264 18
- 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19
- Battery charging 19
- Using the bc 193 to rapid charge the bp 265 19
- Battery case bp 263 20
- Battery charging 20
- Battery gas may cause them to rupture 20
- Battery information 20
- Battery terminals once a week never incinerate used battery cells since the internal 20
- Case is attached to the transceiver 20
- Caution caution when installing batteries make sure they are all the 20
- D battery indication 20
- D battery life 20
- E attach the battery case p 2 20
- Pack or the batteries in the case will become exhausted 20
- Q remove the battery case if it is attached p 2 w install 6 aa lr6 size alkaline batteries 20
- Same brand type and capacity also do not mix new and old batteries together keep battery terminals clean it s a good idea to clean 20
- The battery indicator appears when a battery pack 20
- When using the battery case bp 263 install 6 aa lr6 size alkaline batteries as described below 20
- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21
- Adjusting the squelch level 21
- Adjusting the volume level 21
- Basic operation 21
- Monitor function 21
- Power on 21
- Basic operation 22
- D call channel mode 22
- D memory mode 22
- D vfo mode 22
- D weather channel mode 22
- Mode selection 22
- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 23
- Basic operation 23
- D using 23
- D using the keypad 23
- Operating mode selection 23
- Setting a frequency 23
- Setting a tuning step 23
- Basic operation 24
- Receiving 24
- Transmitting 24
- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 25
- Basic operation 25
- Key lock function 25
- Vol function assignment 25
- Basic operation 26
- D weather alert function 26
- D weather channel selection 26
- Weather channel operation 26
- 7 8 9 10 11 12 13 14 15 16 17 18 19 27
- Repeater and duplex operation 27
- Repeater operation 27
- D reverse duplex function 28
- D setting the duplex direction 28
- D setting the frequency offset 28
- Duplex operation 28
- Repeater operation 28
- 7 8 9 10 11 12 13 14 15 16 29
- D tone information 29
- Repeater operation 29
- Subaudible tones 29
- Auto repeater function 30
- Lockout function 30
- Repeater operation 30
- 8 9 10 11 12 13 14 15 16 17 18 19 31
- General description 31
- Memory call operation 31
- Selecting a memory channel 31
- Selecting the call channel 31
- Channel programming 32
- Memory call operation 32
- 16 17 18 19 33
- 2 3 4 5 33
- 8 9 10 33
- Copying memory call contents 33
- D memory call memory call 33
- D memory call vfo 33
- Memory call operation 33
- Clearing memory contents 34
- Display type 34
- Memory call operation 34
- 8 9 10 11 12 13 14 15 16 17 18 19 35
- Programming a channel name 35
- Programmed scan 36
- Scan operation 36
- Scan types 36
- 2 3 4 5 6 37
- 9 10 11 12 13 14 15 16 17 18 19 37
- Memory scan 37
- Scan operation 37
- Scan resume setting 37
- Setting skip channels 37
- D memory or call channel watch 38
- D memory scan watch 38
- Priority watch 38
- Scan operation 38
- 103 107 39
- 114 118 123 127 39
- 136 141 146 151 39
- 162 167 173 179 39
- 192 203 210 218 39
- 233 241 250 39
- 69 71 74 77 39
- 82 85 88 91 39
- Blinks 39
- Blinks when selecting the ctcss tone item and 39
- Ctcss tone setting vol 39
- Dtcs code setting 39
- Q push func m and then set 8 to enter the set mode 39
- The left 39
- The recommended ctcss tone or dtcs code are shown to 39
- Tone dtcs squelch and pocket beep 39
- Tone squelch and pocket beep 39
- When selecting the dtcs code item 39
- Operation 40
- Setting dtcs polarity 40
- Tone squelch and pocket beep 40
- 10 11 12 13 14 15 16 17 18 19 41
- 2 3 4 5 6 7 41
- Tone scan 41
- Tone squelch and pocket beep 41
- Dtmf memory 42
- Programming a dtmf code sequence 42
- 11 12 13 14 15 16 17 18 19 43
- 2 3 4 5 6 7 8 43
- Transmitting a dtmf code sequence 43
- Confirming a dtmf memory 44
- Dtmf memory 44
- Setting dtmf transfer speed 44
- 16 17 18 19 45
- Set mode programming 45
- Set modes 45
- And dtp rr 46
- Available dtcs codes 46
- D dtcs code 46
- D dtcs polarity 46
- D repeater tone frequency 46
- D tone squelch frequency 46
- Dtp nr 46
- Dtp rn 46
- Selects one of 50 subaudible tone frequencies used to ac cess the repeaters 46
- Selects one of tone frequencies for tone squelch or pocket beep operation 46
- Selects the dtcs polarity between dtp nn 46
- Set mode items 46
- Set modes 46
- The dtcs code s polarity for transmitting or receiving can be independently set by this item 46
- The transceiver has 50 tone frequencies and conse quently their spacing is narrow compared with units hav ing 38 tones therefore some tone frequencies may re ceive interference from adjacent tone frequencies 46
- Usable subaudible tone frequencies unit hz 46
- 12 13 14 15 16 17 18 19 47
- 2 3 4 5 6 7 8 9 47
- D frequency offset 47
- D function key timer 47
- D reverse duplex function 47
- D scan resume setting 47
- D tuning step 47
- Set modes 47
- D lcd backlight 48
- D microphone gain 48
- D tx permission 48
- D vox gain 48
- D weather alert 48
- Set modes 48
- 12 13 14 15 16 17 18 19 49
- 2 3 4 5 6 7 8 9 49
- D dtmf tx key 49
- D operating mode 49
- D vox delay 49
- D vox time out timer 49
- Set modes 49
- D initial set mode operation 50
- Initial set mode programming 50
- Set modes 50
- 12 13 14 15 16 17 18 19 51
- 2 3 4 5 6 7 8 9 51
- D auto power off 51
- D auto repeater 51
- D key touch beep 51
- D time out timer 51
- Initial set mode items 51
- Set modes 51
- D dial assignment 52
- D dtmf speed 52
- D lockout 52
- D squelch delay 52
- Option vol 52
- Selects a desired dtmf transfer speed 52
- Selects the lockout type between repeater busy and off 52
- Selects whether or not to use vol as a tuning control 52
- Set modes 52
- Sets the squelch delay between short and long the delay prevents the squelch from repeatedly opening and closing while receiving the same signal 52
- Top di tuning control volume controls 52
- Top vo volume control tuning controls 52
- Vol and 52
- 12 13 14 15 16 17 18 19 53
- 2 3 4 5 6 7 8 9 53
- D display type 53
- D lcd contrast 53
- D power save 53
- D select speed 53
- Selects the display type for memory mode operation 53
- Selects the lcd contrast 53
- Set modes 53
- The power save function allows you conserve battery life by selecting the duty cycle of the receiver select the ratio of the power save time to the standby time to turn the function off select p s of 53
- The tuning speed acceleration automatically speeds up the tuning speed when rotating vol rapidly 53
- D auto low power 54
- D battery protection 54
- D microphone simple mode 54
- Note be sure to select an appropriate option accord ing to your battery typ 54
- Set modes 54
- Turns the auto low power function on or off when the temperature goes below 0 c 32 f the function automatically sets the output power to low in that case the transmit power selections hi mid are also disabled 54
- User remote control unit the below circuit is for reference only 54
- When the battery voltage decreases the battery protection function automatically turns the transceiver off select the function according to your battery type 54
- 13 14 15 16 17 18 19 55
- 6 7 8 9 55
- Cloning 55
- Cloning operation 55
- D all reset 56
- D partial reset 56
- Resetting 56
- 15 16 17 18 19 57
- 2 3 4 5 6 7 8 9 10 11 57
- Problem possible cause solution ref 57
- Trouble shooting 57
- Options 58
- 16 17 18 19 59
- 5 6 7 8 9 10 11 12 13 59
- D optional unit connection 59
- D turning the vox function on or off 59
- Options 59
- Vox function 59
- D vox related settings 60
- Options 60
- 11 12 13 61
- 17 18 19 61
- 2 3 4 5 6 7 8 61
- D general 61
- D receiver 61
- D transmitter 61
- Specifications 61
- Important 62
- List of country codes iso 3166 1 62
- 2 3 4 5 6 7 8 9 10 11 12 13 63
- Declaration 63
- Of conformity 63
- 02 europe 12 europe 21 22 europe 22 32 europe 23 64
- 1 32 kamiminami hirano ku osaka 547 0003 japan 64
- 13 u k 01 23 u k 02 33 u k 03 64
- A 6795h 1ex w printed in japan 2009 2010 icom inc 64
Похожие устройства
- Zota MK 9 Инструкция по эксплуатации
- Asus X54C-SX399O B815 Инструкция по эксплуатации
- Icom IC-V80E Инструкция по эксплуатации
- Zota MK 12 Инструкция по эксплуатации
- Asus K53E B960 2G 320G Инструкция по эксплуатации
- Icom IC-V80 Sport Инструкция по эксплуатации
- Zota MK 15 Инструкция по эксплуатации
- Lenovo IdeaPad V570c 59319588 Инструкция по эксплуатации
- Icom IC-V82 Инструкция по эксплуатации
- Zota MK 18 Инструкция по эксплуатации
- Acer TravelMate TM5744 Инструкция по эксплуатации
- Icom IC-U82 Инструкция по эксплуатации
- Zota MK 21 Инструкция по эксплуатации
- Samsung NP-RV515-S07RU Инструкция по эксплуатации
- Icom ID-5100A Инструкция по эксплуатации
- Zota MK 24 Инструкция по эксплуатации
- HP Pavilion g6-1315sr Инструкция по эксплуатации
- Icom IC-2200H Инструкция по эксплуатации
- Zota MK 27 Инструкция по эксплуатации
- Lenovo G575 ALE4504G320R7BRU Инструкция по эксплуатации