Home
Главная
Icom
Радиостанции
IC-F9511S
Инструкция по эксплуатации Страница: 23

Icom IC-F9511S [23/24] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

SAFETY TRAINING INFORMATION

W ARN ING

Your Icom radio generates RF electromagnetic en-

ergy during transmit mode. This radio is designed

for and classified as “Occupational Use Only”,

meaning it must be used only during the course

of employment by individuals aware of the haz-

ards, and the ways to minimize such hazards. This

radio is NOT intended for use by the “General

Population” in an uncontrolled environment.

• For compliance with FCC and Industry Canada RF Exposure Re-

quirements, the transmitter antenna installation shall comply with

the following two conditions:

1. The transmitter antenna gain shall not exceed 0 dBi.

2. IC-F9511S/T:

The antenna is required to be located outside of a vehicle and

kept at a distance of 48 centimeters or more between the trans-

mitting antenna of this device and any persons during operation.

For small vehicle as worst case, the antenna shall be located on

the roof top at any place on the centre line along the vehicle in

order to achieve 48 centimeters separation distance. In order to

ensure this distance is met, the installation of the antenna must be

mounted at least 48 centimeters away from the nearest edge of

the vehicle in order to protect against exposure to bystanders.

CAU TIO N

To ensure that your exposure to RF electromag-

netic energy is within the FCC allowable limits

for occupational use, always adhere to the fol-

lowing guidelines:

• DO NOT operate the radio without a proper antenna attached,

as this may damage the radio and may also cause you to exceed

FCC RF exposure limits. A proper antenna is the antenna supplied

with this radio by the manufacturer or an antenna speciﬁcally au-

thorized by the manufacturer for use with this radio.

• DO NOT transmit for more than 50% of total radio use time (“50%

duty cycle”). Transmitting more than 50% of the time can cause

FCC RF exposure compliance requirements to be exceeded. The

radio is transmitting when the “TX indicator” lights red. You can

cause the radio to transmit by pressing the “PTT” switch.

Electromagnetic Interference/Compatibility

During transmissions, your Icom radio generates RF energy that can

possibly cause interference with other devices or systems. To avoid

such interference, turn off the radio in areas where signs are posted

to do so. DO NOT operate the transmitter in areas that are sensitive

to electromagnetic radiation such as hospitals, aircraft, and blasting

sites.

Icom IC-F9511S [23/24] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Содержание

Похожие устройства