Icom IC-M1 [17/24] D auto scan functio

SET MODE

D Weather alert function “AL”

An NOAA broadcast station transmits an weather alert tone

before an important weather information. When the weather

alert function is turned ON, the transceiver detects the alert,

then ﬂashes the “ALT” indicator until the transceiver is oper-

ated. The previously selected (used) weather channel is

checked in any time during standby or while scanning.

•“ALT” appears when the function is set ON.

D Scan type selection “SC”

The transceiver has 2 scan types: normal scan and priority

scan. Normal scan searches all tag channels in the selected

channel group. Priority scan searches all tag channels in se-

quence while monitoring channel 16.

Normal scan (default) Priority scan

D Scan resume timer “St”

The scan resume timer can be selected as a pause (OFF) or

timer scan (ON). When OFF is selected, the scan pauses

until the signal disappears. When ON is selected, the scan

pauses 5 sec. and resumes even if a signal is being received

on channels except for channel 16.

D Auto scan function “At”

While in standby, this function automatically starts the se-

lected scan (normal or priority scan) 30 sec. after operation.

•“SCAN” appears when the function is turned ON.

Scan timer OFF (default)

Weather alert function OFF (default)

SCAN

Auto scan OFF (default)

NOTE: The transceiver has a power save function but the

power save function does not function when the auto scan

function is in use.