Fellowes Powershred LX 201 Black (CRC50500) [2/57] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Fellowes Powershred LX 201 Black (CRC50500) [2/57] English

Fellowes Powershred LX 221 белый (CRC50505) [2/57] English
15
15
15
Will shred: Paper, credit cards, staples and paper clips
Will not shred: Adhesive labels, continuous form paper,
transparencies, newspaper, cardboard, CD/DVDs, laminates,
file folders, X-rays or plastic other than noted above
Paper shred size: Micro-Cut, 2mm x 12mm
Maximum Sheets per pass:
LX201 - 12*, LX211 - 15*, LX221 - 20*
Maximum Paper entry width: 230mm
Plug in and put disconnect power
switch in ON (I) position
* A4 (70g), paper at 220V-240V, 50/60 Hz, 2.5 Amps (LX201), 3.0 Amps (LX211), 3.8 Amps (LX221); heavier paper, humidity or other than rated voltage may
reduce capacity. Maximum recommended daily usage rates: 1000 sheets per day, 25 credit cards. Fellowes SafeSense
®
shredders are designed to be
operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
WARNING! IMPORTANT SAFETY INSTRUCTIONS – Read before using!
CAPABILITIES
BASIC SHREDDING OPERATION
Align paper/card to center of paper
entry. Feed straight into paper entry
and release.
2
16
16
16
16
16
16
PAPER OR CARD
A. SafeSense
®
Technology
B. Paper entry
C. See safety instructions
D. Pullout bin
E. Casters
F. Disconnect power switch
1. OFF
2. ON
G. Control Panel and LEDs
1
ENGLISH
• Operation,maintenance,andservicerequirements
are covered in the instruction manual. Read the entire
instruction manual before operating shredders.
• Keepawayfromchildrenandpets.Keephandsaway
from paper entry. Always set to off or unplug when
not in use.
• Keepforeignobjects–gloves,jewelry,clothing,hair,
etc.–awayfromshredderopenings.Ifobjectenters
top opening, switch to Reverse ( ) to back out
object.
• DONOTuseaerosolproducts,petroleumbasedor
aerosol lubricants on or near shredder. DO NOT USE
“CANNED AIR” OR “AIR DUSTERS” ON SHREDDER.
Vapors from propellants and petroleum based
lubricantsmaycombustcausingseriousinjury.
• Donotuseifdamagedordefective.Donot
disassemble shredder. Do not place near or over heat
source or water.
• ThisshredderhasaDisconnectPowerSwitch
(F) that must be in the ON ( ) position to operate
shredder. In case of emergency, move switch to
OFF (O) position. This action will stop shredder
immediately.
• Avoidtouchingexposedcuttingbladesunder
shredder head.
• Shreddermustbepluggedintoaproperly
grounded wall outlet or socket of the voltage
and amperage designated on the label. The
grounded outlet or socket must be installed near
theequipmentandeasilyaccessible.Energy
converters, transformers, or extension cords should
not be used with this product.
• FIREHAZARD–DoNOTshredgreetingcardswith
sound chips or batteries.
• Forindooruseonly.
• Unplugshredderbeforecleaningorservicing.
2
LX221
F.
A.
B.
D.
E.
C.
G.
LX201/LX211
F.
G.
A.
B.
D.
E.
C.
LX201
Continuous operation. Up to 10-minutes maximum.
NOTE: Shredder runs briefly after each pass to clear entry.
Continuous operation beyond 10-minutes will trigger
15-minute cool down period.
LX211
Continuous operation. Up to 20-minutes maximum.
NOTE: Shredder runs briefly after each pass to clear entry.
Continuous operation beyond 20-minutes will trigger
15-minute cool down period.
LX221
Continuous operation. Up to 20-minutes maximum.
NOTE: Shredder runs briefly after each pass to clear entry.
Continuous operation beyond 20-minutes will trigger
15-minute cool down period.

Содержание

Похожие устройства

Скачать