Vitek VT-7128 [4/20] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-7128 [4/20] English

Vitek VT-7128 [4/20] English
4
ENGLISH
the warranty certificate and on the website
www.vitek.ru.
• To avoid damages, transport the unit in the
original package only.
• For environment protection do not discard the
unit with usual household waste after its ser-
vice life expiration; apply to a specialized cen-
ter for further recycling.
• Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature keep it for at least 3 hours at
room temperature before switching on.
– Unpack coffee grinder.
– Before using the unit, make sure that your
home mains voltage corresponds to the unit
operating voltage.
– Remove the ground coffee container (1) with
the lid (10) pulling it towards you.
– Remove the coffee bean container lid (6),
turn the container (5) counterclockwise and
remove it.
– Remove the upper millstone (12) turning it
clockwise in the «unlock» direction.
– Carefully wipe the lower millstone.
– Wash all removable parts with warm water
and a neutral detergent, then rinse and dry
thoroughly.
– Clean the coffee grinder body (3) with a soft,
slightly damp cloth, and then wipe it dry.
– Install the upper millstone (12) back to its
place turning it counterclockwise in the «lock»
direction until bumping.
– Install the coffee bean container (5), turn it
clockwise until bumping and cover it with the
lid (6).
– Close the ground coffee container (1) with the
lid (10) and install the container to its place
securely.
USING THE COFFEE GRINDER
The maximal continuous operation time is
1 minute with a 5 minute subsequent break.
– Make sure that all removable parts are
installed properly.
– Open the lid (6) and put the coffee beans into
the container (5). There is a scale on the inner
surface of the container (5) which allows to
match the amount of coffee beans and num-
ber of cups of the ready drink.
Note:
– Do not put more than 80 g coffee beans into
the container (5).
– the ground coffee scale in “cups” inside the
container (5) is approximate, if the amount of
ground coffee is insufficient, add more cof-
fee beans and switch the coffee grinder on.
– Cover the container (5) with the lid (6).
– Turn the control knob (4) to select the required
grinding degree on the scale (7) «FINE»,
«MEDIUM», «COARSE»:
«FINE» – grinding degree for pump-driven
coffee makers;
«MEDIUM» – medium grinding for drip cof-
fee makers;
«COARSE» – coarse grinding for brewing cof-
fee in the coffee pot.
– The indicator (8) shows the selected grind-
ing degree.
– Unwind the power cord completely and insert
the power plug into the mains socket.
– Switch the unit on by pressing the button (9).
Note:
– before switching the unit on make sure that
the containers (1 and 5) are installed prop-
erly and covered with the lids (6 and 10), oth-
erwise the coffee grinder will not switch on;
– if during the coffee grinder operation the
coffee beans do not reach the millstones,
it is recommended to slightly tilt the coffee
grinder or shake it carefully.
– The coffee grinder is switched off automati-
cally.
– If during the operation the coffee bean con-
tainer (5) becomes empty or if you need to
switch the coffee grinder off immediately,
press the on/off button (9) again.
– Unplug the unit after operation.
– For the best taste of the ready drink grind
only necessary amount of coffee beans right
before the coffee making.
– To prevent the flavour degradation of ground
coffee keep the fresh-ground coffee in tightly
closed jars or in a vacuum package.
CLEANING AND STORAGE
– Unplug the coffee grinder before cleaning.
– Disassemble the coffee grinder as described
in the chapter “BEFORE THE FIRST USE”.
– Wash all removable parts with warm water and
a neutral detergent, then rinse and dry them.
IM VT-7128.indd 4 17.08.2017 16:50:42

Содержание

Похожие устройства

Скачать