Candy CDPH 2D1145X [6/44] Installation instructions

Installation instructions

Parts supplied

Prior to installation

Unpacking and handling

Connections and services

● Check packaging and dishwasher for signs of transport damage. If the

dishwasher is in any way damaged, do not install it. Contact the dealer the

dishwasher was purchased from.

● Disposal of packaging: some of the packaging is recyclable. Check the symbols

and labels and recycle if possible.

● Never lift the dishwasher from the door handle or the top panel. Doing so may

cause damage.

● Always be careful with the hoses and power cord at the back of the dishwasher.

Careful handling will prevent damage and malfunction from squashing, kinking or

cuts.

● While installing the dishwasher, check the drain hose is not restricted or kinked.

● Check that the power cord is long enough to reach the outlet. If it isn’t, it must be

replaced by a haier authorised technician. Extension cords or multi-outlet power

boards should not be used to connect the dishwasher to the power supply.

● Check that the hoses are long enough to reach the services. If a hose needs

extending, ensure that the extension hose is new and of equal quality and diameter

● The dishwasher should not be connected to a water system where the

temperature exceeds 60

● The dishwasher must not be connected to an undersink high-pressure “push-

through” type hot water system, as damage to the system will result.

Drain hose

support (1)

Installation and

User Instructions

Inlet hose (1)

Salt funnel(1)