Candy BCBS 50 NUK [13/16] Troubleshooting

TROUBLESHOOTING

PROBLEM

CAUSE

REMEDY

The inside illumination light bulb does not

turn on.

• Electricity absence.

• Door switch is blocked.

• The power cord is not properly plugged in.

• Check whether the appliance is switched off.

• The refrigerator and freezer have been

excessively filled.

• Surrounding temperature is too low.

• No electrical power.

properly.

period of time.

• Check the temperature

(see Temperature adjustment)

• Wait for the stabilization of the temperature of

the refrigerator or freezer.

• Check that the ambient temperature is in

accordance with what is indicated on the

nameplate (see Installation).

• The power cord is not properly plugged in.

• Erroneous setting of the temperature.

• Food in contact with the back wall.

• The freezing of too much fresh food causes a

lowering of the temperature of the refrigerator

• Check the temperature

setting (see Temperature Adjustment) and, if

possible, decrease temperature setting.

• Separate the food from the back wall of the

refrigerator.

• Do not exceed the maximum amount to be

frozen (see Freezing).

The drain tube could be clogged.

• Clean the drain tube with a stick or the like to

allow the discharge of water.

The bottom of the refrigerator compartment

• Lack of air circulation.

• Vegetables and fruits with too much moisture.

• Verify that your glass shelf tray vegetables are

not put foods that prevent air circulation.

• Wrap the fruit and vegetable materials

plastic such as, for example, films, bags or

containers.

The motor runs continuously.

• The doors are not closed.

• The doors are opened frequently.

• Ambient temperature is very high.

• Thickness of frost than 3mm.

• Make sure the doors are closed and if the seals

• Avoid unnecessary open ports for a certain

• Verify that the ambient temperature is in accor-

• The freezer door is not closed.

• Make sure the door is closed and that the

gasket is sealing properly.

IF YOU ARE NOT SOLVED THE PROBLEM, CONTACT THE SERVICE CENTER, PLEASE GIVE THE TYPE OF FAULT AND THE INFORMATION

ON THE PLATE OF THIS APPARATUS TO INSIDE THE REFRIGERATOR COMPARTMENT:

• The model of equipment.

• The number of series.

dance with the specifications on the nameplate

(see Installation).

• Set the display/thermostat a warmer temperature.

• Defrost the unit (see Defrosting).