Daikin FAYP71LV1 [5/30] Before installation

English 2

• When wiring the power supply and connecting the wiring between the indoor and outdoor units, position the

wires so that the control box lid can be securely fastened.

Improper positioning of the control box lid may result in electric shocks, fire or the terminals overheating.

• If the refrigerant gas leaks during installation, ventilate the area immediately.

Toxic gas may be produced if the refrigerant gas comes into contact with fire.

• After completing the installation work, check that the refrigerant gas does not leak.

Toxic gas may be produced if the refrigerant gas leaks into the room and comes into contact with a source

of fire, such as a fan heater, stove or cooker.

Failure to install an earth leakage breaker may result in electric shocks.

• While following the instructions in this installation manual, install drain piping in order to ensure proper

drainage and insulate piping in order to prevent condensation.

Improper drain piping may result in water leakage and property damage.

• Remote controller (wireless kit) transmitting distance can result shorter than expected in rooms with elec-

tronic fluorescent lamps (inverter or rapid start types).

Install the indoor unit as far away from fluorescent lamps as possible.

• Do not install the air conditioner in the following locations:

(a)where a mineral oil mist or an oil spray or vapor is produced, for example in a kitchen

Plastic parts may deteriorate and fall off or result in water leakage.

or where volatile flammables such as thinner or gasoline are handled.

• Decide upon a line of transport.

• Leave the unit inside its packaging while moving, until reaching the installation site. Use a sling of soft mate-

rial, where unpacking is unavoidable or protective plates together with a rope when lifting, to avoid damage

• Refer to the installation manual of the outdoor unit for items not described in this manual.

• Installation should only be carried out after checking in advance the type of refrigerant to be used. (Using

• Do not install or operate the unit in rooms mentioned below.

• Laden with mineral oil, or filled with oil vapor or spray like in kitchens. (Plastic parts may deteriorate.)

• Where corrosive gas like sulfurous gas exists. (Copper tubing and brazed spots may corrode.)

• Where volatile flammable gas like thinner or gasoline is used.