Korting OGG771CFX [37/40] Cleaning and maintenance

Figure 12.

CLEANING AND MAINTENANCE

Important: before carrying out any maintenance operation on the oven, it must always be unplugged form

the power supply or disconnected from the mains by means of electrical system master switch.

Warning: before making any of the below operations, use the necessary protection equipment (gloves, etc.).

Wait for the appliance to cool down before proceeding with any cleaning operation.

Do not use abrasives, bleach or coarse cleaning materials.

Never clean the appliance with high pressure water or steam cleaning equipment.

Do not use abrasive materials or substances for cleaning glass panels, as this may damage them.

Remember that if the surface of the glass panel becomes scratched, this could lead to a dangerous failure.

Wipe the inside cavity of the oven by using a damp cloth with a special product for ovens, rinse and dry the

oven carefully.

When cleaning the lower part of the oven, it is recommended to remove any residuals while the oven is still

warm , but non hot.

For cleaning the external parts of the oven use a soft cloth and soapy water, rinse and dry carefully.

Wash the accessories in a dishwasher or in the sink, using an oven cleaner.

How to remove and reassemble the side racks

To remove the side rack (right or left rack), pull it gently away from holes A and B until it is unhinged from the

holes; repeat this process with holes C and D.

To reassemble the rack, do the following:

insert the rack in holes C and D simultaneously, then in hole B and finally in hole A.

See figure 13 below.

Figure 13.