Beko FFSG52010W [16/96] Gas hose outlet

Содержание

1 2 3 Gas hose outlet Blind plug Plastic plug Before gas connection make sure that the natural gas valve and the gas hose outlet of the product to be connected to the gas is on the same side If the natural gas valve and the gas hose outlet sealed with plastic plug face on the same side make the gas connection as shown in the figure below When closing the gas hose outlet that will not be used you must definitely use a new and unused sealing gasket DANGER The flexible gas hose must be connected in a way that it does not contact the moving parts around it and is not trapped when the moving parts are travelling e g drawers Besides it should not be placed in spaces where it might get squeezed DANGER If the natural gas valve and the gas hose sealed with blind plug face on the same side remove and dispose the plastic plug Take out the blind plug and close the gas hose outlet where gas connection will not be made with a new unused sealing gasket Make the gas connection as shown in the figure below on the gas hose outlet near the natural gas valve The gas hose must not be clamped bent or trapped or come into contact with hot parts of the product There is the risk of explosion due to damaged gas hose Leakage check at the connection point Make sure that all knobs on the product are turned off Make sure that the gas supply is open Prepare soapy foam and apply it onto the con nection point of the hose for gas leakage control Soapy part will froth if there is a gas leakage In this case inspect the gas connection once again If your product has two gas hose outlets make sure that the unused gas outlet is sealed with a blind plug Prepare soapy foam and apply it onto the connection point of the blind plug to check for gas leaks Soapy part will froth if there is a gas leakage In this case inspect the blind plug connection again Instead of soap you can use commercially available sprays for gas leak check ______ Never use a match or lighter to make the gas leakage control Push the product towards the kitchen wall Risk of fire If you do not make the connection according to the instructions below there will be the risk of gas leakage and fire Our company cannot be held responsible for damages resulting from this Gas connection must be made by the authorised service provider only Gas connection of the product must definitely be made through the gas hose outlet near the natural gas valve Plastic plug must be disposed and the gas hose outlet that will not be used must be sealed with the blind plug 16 EN Adjusting the feet of oven Vibrations during use may cause cooking vessels to move This dangerous situation can be avoided if the product is level and balanced For your own safety please ensure the product is level by adjusting the four feet at the bottom by turning left or right and align level with the work top Final check 1 Open gas supply 2 Check gas installations for secure fitting and tightness 3 Ignite burners and check appearance of the flame

Скачать