Beko FFSG42012B — безопасное подключение электрических и газовых установок [16/96]

DANGER n Before starting any work on the electrical installation disconnect the product from the mains supply There is the risk of electric shock Connect the power cable into the socket Gas connection DANGER Product can be connected to gas supply system only by an authorised and qualified person or technician with licence Risk of explosion or toxication due to unprofessional repairs Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised or unlicensed persons DANGER B Before starting any work on the gas installation disconnect the gas supply There is the risk of explosion If the gas hose outlet and the natural gas valve do not face on the same side make sure that the hose does not pass through the hot area when connecting it Gas adjustment conditions and values are stated on labels or ion type label ____________ JF lYour product is equipped for natural gas NG Natural gas installation must be prepared suitably for the assembly before installing the product Gas connection of your product will be performed by the authorised service There must be a flex pipe at the outlet of the installation for the natural gas connection of your product and the tip of this pipe must be sealed with a blind plug The blind plug will be removed during connection and your product will be connected by means of a flat connection device sleeve Make sure that the natural gas valve is readily accessible If you need to use your product later with a different type of gas you must consult the autho rised service for the related conversion procedure If your product has only one gas outlet Before connecting the gas hose make sure that the gas hose outlet at the back of the product is on the same side of the product as the natural gas valve 16 EN If your product has two gas outlets One of the two outlets is sealed with a blind plug and the other one with a plastic plug Locations of the blind plug and plastic plug may be different depending on the product