Asus P10S-V/4L — как очистить CMOS RAM: пошаговое руководство [37/140]

Превью страниц Страница 37 / 140

ASUS P10S-V/4L

2-21

2.7 Jumpers

1. Clear RTC RAM (3-pin CLRTC1)

ThisjumperallowsyoutocleartheCMOSmemorysystemsetupparametersby

erasingtheCMOSRealTimeClock(RTC)RAMdata.Theonboardbuttoncellbattery

powerstheRAMdatainCMOS,whichincludesystemsetupinformationsuchas

system passwords.

To erase the RTC RAM:

1. TurnOFFthecomputerandunplugthepowercord.

2. Movethejumpercapfrompins1–2(default)topins2–3.Keepthecaponpins

2–3forabout5–10seconds,thenmovethecapbacktopins1–2.

3. Plug the power cord and turn ON the computer.

4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetupto

reenter data.

• Ifthestepsabovedonothelp,removetheonboardbatteryandshortthetwopins

againtocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,reinstallthe

battery.

• Duetochipsetbehavior,ACpoweroffisrequiredtoenableC.P.R.function.Youmust

turn off and on the power supply or unplug and plug the power cord before rebooting

the system.

ExceptwhenclearingtheRTCRAM,neverremovethecaponCLRTCjumperdefault

position.Removingthecapwillcausesystembootfailure!