P.I.T. PAC24-C1 [6/25] Compressor start and operation

Содержание

Air compressor RULES OF OPERATION Preparation of Compressor for Oper ation 2 Provide free space for compressor mainte nance 3 To maintain operating temperatures within normal limits install the compressor in places with sufficient ventilation The air temperature in the room should be between 5 and 35 C It is not allowed to operate the compres sor in unheated rooms In case of insufficient ventilation it is necessary to ensure the flow of sufficient air to cool the compressor and to discharge hot air from the room Do not allow hot air to recirculate 3 Do not install the compressor in places where the temperature may be less than 5 C and the altitude above 2000m 4 The normal temperature of the compressor is 80 C the oil in the crankcase is 70 C 5 Voltage fluctuations should not exceed 5 of nominal 6 The oil level in the crankcase must not be below the red mark of the oil level indicator 7 It is necessary to let the compressor run for 1 2 minutes for better distribution of oil 8 Use only pure oil Compressor Start and Operation 1 Carefully read and follow the instruction manual 2 Open the package check the complete ness and make sure there is no damage 3 Install shock absorbers and wheels on the receiver 4 Remove the oil filler cap 5 Fill the crankcase with oil and tighten the oil filler cap Check the oil level on the oil gauge it should be above the red mark on the sight glass If necessary add compressor oil Prevent oil leaks from the joints and on the external surfaces of the compressor 6 Install the air filter 7 Check mains voltage 8 Securely connect the compressor to the compressed air consumers using an appropri ate pneumatic tool 9 Open the condensate drain valve and then close it 10 Starting and stopping of the compressor is carried out only by a switch on the pressure relay unit The pressure relay automatically turns the compressor on and off maintaining the pressure of compressed air within the specified limits Attention In order to avoid overheating of the electric motor the compressor operates in a two stroke mode with periodic switching on off In case of overheating the thermal protection installed on the motor is triggered

Скачать
Случайные обсуждения